2L 16v swap into mk1 Help!!?

[Spetta Jr]

Hey guys. so i swapped a 1992 passat 2L 16Valve into my mk1.. on the 8v there was a spot for my warm up regulator / fuel regulator which ever you prefer calling it.. to be mounted but I cant find a spot to mount it on my 16valve. any suggestions??? lemme know thanks!

[Jones84]

You need to use the ECU and Knock box out of the Passat. As well as the fuel dist and lines. the 2.0 16v fuel injectors are diffrent from the 8v as well as the timing. It will run on the 8v stuff but not well. to get the most out of the swap change it all..

[Spetta Jr]

Im just running CIS basic with the 16v. Which from what other people have told me it will work.

[ps2375]

Just need the knock box and TB switches and the fuel lines w/ injectors. We had a donor 16V scirocco. The motor did very well on the CIS. We were not worried about cold starts, we just wanted consistant fueling, and mounted the WUR where the battery would've been along with a coolant catch tank we had mounted there.

[Spetta Jr]

Okay thanks!