Username or Email Address
Do you already have an account?
Forgot your password?
  • Log in or Sign up

    VWVortex


    Results 1 to 24 of 24

    Thread: Interest in carbon fiber parts?

    1. 05-01-2012 09:33 AM #1
      A good friend of mine owns a carbon fiber (Real carbon fiber) business (G3 Composites LLC). He & I have been friends for over 10 years (In real life).

      We're both enthusiasts as well, of course. All supplies are sourced from the USA & all work is done in the USA (He is based in FL)

      I am posting to gauge interest on what folks may want.

      I'd be happy to become a vendor if there was enough interest.

      I just sent him several pieces from my Corvette that I should have soon. Can't wait to get them back.

      Here is a link to some of the work he has done:
      http://s1120.photobucket.com/albums/l496/g3Composites/

      Thanks,
      Tom

    2. 05-02-2012 10:29 AM #2
      Customer I just sold some E36 BMW door handles too has posted very pleased w/the product:
      http://forums.bimmerforums.com/forum...7&postcount=49

    3. 05-07-2012 04:56 PM #3
      Everyone should read, whether you're in the market for carbon fiber today or not, the "How to buy carbon fiber" post on G3's Facebook page:

      http://www.facebook.com/g3composites

    4. 05-15-2012 06:45 PM #4
      Another satisfied customer below & his 4th gen Trans Am. He will be posting more photos once the rest of the items are done as he sent in even more parts after he got the first batch back!

      LS1TECH - View Single Post - Carbon Fiber on 4th gens

    5. 05-18-2012 03:00 PM #5
      Here is the front panel that he just did on his wife's new Audi A5.


    6. n00b Canta4d@showoff's Avatar
      Join Date
      May 18th, 2012
      Location
      San jose ca
      Posts
      5
      Vehicles
      Audi a4 b7 stage 2+, porsche 996tt x50 package, bmw //mx5
      05-18-2012 03:13 PM #6
      Hi. Would he be able to do some side splitter for my 08 a4? It would measure about 7ftx 5inches. Thanks.

    7. 05-18-2012 03:14 PM #7
      Quote Originally Posted by Canta4d@showoff View Post
      Hi. Would he be able to do some side splitter for my 08 a4? It would measure about 7ftx 5inches. Thanks.
      Are you asking to wrap yours or a complete new mold? For the mold, I need at least 5 committed buyers.

    8. n00b Canta4d@showoff's Avatar
      Join Date
      May 18th, 2012
      Location
      San jose ca
      Posts
      5
      Vehicles
      Audi a4 b7 stage 2+, porsche 996tt x50 package, bmw //mx5
      05-18-2012 03:19 PM #8
      Thats going to be a new mold. Its just going to be a like a flat board. If you get what i mean. ;o)

    9. 05-18-2012 03:20 PM #9
      Quote Originally Posted by Canta4d@showoff View Post
      Thats going to be a new mold. Its just going to be a like a flat board. If you get what i mean. ;o)
      He can do it, but need at least 5 unless you wanted to front the development cost with the opportunity to get that $ back.

    10. n00b Canta4d@showoff's Avatar
      Join Date
      May 18th, 2012
      Location
      San jose ca
      Posts
      5
      Vehicles
      Audi a4 b7 stage 2+, porsche 996tt x50 package, bmw //mx5
      05-18-2012 05:19 PM #10
      About how much would it run though? Ill probably need about 2 right now.

    11. 05-18-2012 10:40 PM #11
      Quote Originally Posted by Canta4d@showoff View Post
      About how much would it run though? Ill probably need about 2 right now.
      Development cost is usually at least a few hundred per piece + the cost of the part of course.

    12. 05-23-2012 11:29 AM #12
      that product provides great utility, I would definitely post something positive about it too. check out
      http://4wheelonline.com/jeep/Bestop.2447 for some great jeep accessories too.

    13. 06-03-2012 03:12 PM #13
      Below are the Front splitters & rear bumper insert for a CTS-V we just did:





    14. 06-11-2012 11:36 AM #14
      G3 Carbon

    15. 06-21-2012 11:18 PM #15
      Added some (real) carbon fiber to my personal car courtesy of my friend. Carbon fiber center console, gauge bezel pods, rear hatch handle, climate control knobs, passenger ac vent bezel, shifter trim, door lock bezels & door sills.

      Feel free to reach out to me if you need some carbon work.

      Now for the pictures!



















      G3 Carbon

    16. Member reticulan's Avatar
      Join Date
      Jul 14th, 2001
      Posts
      3,230
      Vehicles
      2013 S60 T5 AWD, 2006 A4 2.0T Q S-Line 6MT, 98 K1200RS
      07-09-2012 02:04 AM #16
      I'd be interested in a DTM replica front splitter and or S4 rear diffuser for a B7 A4. I'm sure a lot of people on audi zine would also.

    17. 08-16-2012 09:32 AM #17
      We did the orange kevlar radiator cover for this GT-R
      http://www.luxury4play.com/asian-aut...ml#post1800501
      G3 Carbon

    18. Member
      Join Date
      Aug 13th, 2006
      Location
      Franklin MA
      Posts
      405
      Vehicles
      337
      09-25-2012 12:33 PM #18
      Looks like really nice parts. Are you selling more of those A5 front plate brackets?
      Audi & VW Service
      http://fourwardmotors.com

    19. 09-25-2012 12:34 PM #19
      Quote Originally Posted by SilverSLine View Post
      Looks like really nice parts. Are you selling more of those A5 front plate brackets?
      Yes, anyone who wants one can have it made.
      G3 Carbon

    20. 10-23-2012 04:16 PM #20
      Take a look at the Audi R8 we recently finished. This car will be featured in Rides magazine soon as well.

      Full album: http://s1120.photobucket.com/albums/...der/?start=all






      G3 Carbon

    21. Member asal's Avatar
      Join Date
      Oct 12th, 2007
      Location
      inside the beltway, VA
      Posts
      631
      Vehicles
      '11 Avant S-line, previous A3 TDI
      11-08-2012 10:38 PM #21
      so what's the cost for the A3 stuff? center console, door trim, etc. is it a kit? PM if you want.

    22. 11-09-2012 09:56 AM #22
      Quote Originally Posted by asal View Post
      so what's the cost for the A3 stuff? center console, door trim, etc. is it a kit? PM if you want.
      PM sent
      G3 Carbon

    23. 11-16-2012 02:20 PM #23
      CTS-V fog bezels we just did.

      Like us on Facebook!!!!

      Thanks,
      Tom





      G3 Carbon

    24. 11-23-2012 05:49 AM #24
      Carbon fiber reduces weight, but also gives the car a more aggressive look attractive and only. Car, high-mold carbon fiber customize. What's more, if you want to come audi carbon, carbon fiber, and then locate and start personalizing bize.Audi


      Click here

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •