F/S--- the candy everybody wants---

[VWHACK]

Sold my Scirocco 16V, took a few things off before I "gave it away"
All parts are in excellent shape. Pics will follow later this week.

No need for parts, looking at another new Rolex Explorer 1, so sorry no trades. ( unless you have a Touareg super-charger laying around) And not lookin' for a Folex either.

Check out how long Ive been on Vortex, I am a credible seller...



Euro 50mm manifold, upper and lower with new brass inserts and injector seats, refinished by McPeak in Riverside last year, Like New, with NEW plenum gasket $525 SOLD

Ported / Polished 2.0 16v Cylinder head, has 500 miles since rebuild. Built by FF Heads in Riverside. (Fumiyo Fukaya was the machinist at Techtonics in the early 80's) Techtonics Titanium Retainers, High Lift Valve springs, Autotech 260 degree cams, lightweight INA lifters
Valve grind alone was over $1100 / over $1900 invested in head alone, $1100 SOLD

Neuspeed Oil Pan, ( Same as Shrick ) flawless shape with all hardware, no damage, no broken fins $200 - NEVER DRILLED- SOLD

Momentum Motor Parts WILWOOD 10" 4 piston aluminum calipers / front stainless lines, less than 300 miles since installed. Paid over $675 ( little caliper clearance was needed to clear my ATS wheels, though unnoticeable) Black color, like new shape, asking $450 SOLD

Neuspeed A1 chassis Rear Triangulated strut tie bar, like new shape, with all hardware $300SOLD

Neuspeed A2 chassis Rear Triangulated strut tie bar, like new shape, with all hardware, new in box, never installed - brand new- $325 SOLD

Drake 8v upper strut tie bar ( fresh powder coat in black) $200

Decent shape Autotoech lighweight hollow sway bars, A1 chassis, front and rear $300 SOLD

Decent shape gloss black Scirocco 16v Euro Bumpers $400 DEPOSIT TAKEN

Decent shape euro 16v headlights, with euro turns, (need adjusters) $250 SOLD

H&R Coil Overs, ( not ultra low) Id recommend rebuilding, ( Bilstein will rebuild to any custom valving you want for 65 each ) Over 1000 new, sell for $300 they work fine, but rears are soft. SOLD

Early urethane upper strut mounts, fresh powder coat, need bearings to finish, has new uretane inserts $200 SOLD

Brand new, never installed Neuspeed Stainless 6pc brake line set $100 SOLD

Brand new in Kamei Eyelid Spoiler, Brand New In BOX!!!!! Never installed, new in BOX $250, oh did I say New In Box?!? SOLD

Brand new window scraper seals pair, $50 / SOLD

All items are available at my shop in the OC for pick up or will ship at your expense.
Paypal cheerfully accepted

[euroteknique]

candy more like crack i'm sitting here thinking how can i buy this one item from you. how can i rob peter to pay paul. and without the wife filing for divorce.

I just don't have all the money well i do but it needs to go to other things
for the last half hours its been will if i do then i can... or if I pay this later.....
but then the wife's B-day
then i'm like but the car doesn't even run what am I thinking.

[VWHACK]

candy more like crack i'm sitting here thinking how can i buy this one item from you. how can i rob peter to pay paul. and without the wife filing for divorce.

I just don't have all the money well i do but it needs to go to other things
for the last half hours its been will if i do then i can... or if I pay this later.....
but then the wife's B-day
then i'm like but the car doesn't even run what am I thinking.

Items Ive hoarded. Now knowing I wont ever be able to find another one like I sold. So its time to let em go.
If there is something you want maybe we can do a deposit to hold till...

[kcimos]

I'm extremely interested in the euro bumpers.
How much do you think it would cost to ship to 24060?

[VWHACK]

I'm extremely interested in the euro bumpers.
How much do you think it would cost to ship to 24060?

I will throw up some pictures tomorrow evening.

[MrPill]

Did you get my IM?
-Dan

[bmore-101]

Pm'd

[VWHACK]

all replied to...

[loudogvwrocc]

Interested

[MrPill]

Monies sent - check you inbox.
Thanks,
Dan

[VWHACK]

ttt

[VWHACK]

[71camaro]

PM sent

[VWHACK]

replied, pics to follow

[VWHACK]

pics are up.

[VWHACK]

pms replied to...
.thanks for the interest.

[VWHACK]

pm's replied

[hmontaq]

Just saw this thread. Been looking for that brake setup forever

[8816VSCIROCCO]

pm & paypal sent! Excellent seller here! top quality parts

[VWHACK]

thanks for the interest.

[VWHACK]

ttt

[ltucker]

Got the calipers and brake lines today. In good condition and as advertised. Thank you. Really looking forward to feeling how they work.

You have any sugestions as to setting them up such as fit and brake balance front to rear?

[VWHACK]

Got the calipers and brake lines today. In good condition and as advertised. Thank you. Really looking forward to feeling how they work.

You have any sugestions as to setting them up such as fit and brake balance front to rear?

They are designed to match the 16v 22mm Master Cylinder of the Scirocco.
Pick one up for a 90 G60 Corrado, add rear discs and you are set. ( cheaper than a Scirocco master and fits the same)

[ltucker]

I'm looking for a 16v parts car here in the bay area. I would like to pull the entire brake system off that and use these willwood calipers.
Anybody know of one available?

[MrPill]

.......dropped off parts from the westcoast for me (and Gino). They are as described, very nice!

Thanks,
Dan

[bmore-101]

Bump for a solid seller. Got my spoiler - packed like a pro.

[ltucker]

Got the rear triangulated bar. Thank you.

[jpoole689]

Proud owner of a new 50MM intake and power module. Great seller.