Mine rounded out from improper installation. Anyone got a part number on this or advice on a replacement. Junk yard isnt an option
Go to hobbylobby or a good hardware store that has a selection of 'hobby' brass tubing and look for a piece that has a similar cross section. Alternatively, get a nylon fastener or bolt and use a dremel or small black plane or similar tool and square it up. It would probably take all of 15 minutes...
Last edited by crewsr; 05-09-2012 at 10:43 AM.
It seems likely that my cloak of invisibilty is still firmly intact,
but it's possible he stopped postiing because it worked great and he no longer needs us.
orr it was such a simple fix
well maybe he's just too embarrased to come back and post letting us all know how easily it worked.
I had a similar problem yesterday, screwed the speedo cable on and still didn't have a speedometer.
Unscrewed it to find the plastic, square peg missing.
I pulled one out of another (with my fingers, no special tools, ha)
flipped it for fun and shoved it into the cable of the '84 Rabbit project.
Taa daa speedometer/odometer.
Something else I'll need to keep a spare of and remember where I put it, ha.
Oh well, a square peg doesn't take up much room.
Last edited by fatmobile; 05-14-2012 at 03:35 AM.