Remove the Y-pipe, then disconnect and remove the EGT sensors. The secondary air injection solenoid valve (N112) is secured to a bracket below the control modules for the EGT sensors. Disconnect the harness connector from valve and slide bracket off studs at the intake manifold with vacuum lines connected. Then disconnect the vacuum lines and remove the valve from the bracket.
+ Reply to Thread
Results 1 to 2 of 2
-
Member
- Join Date
- Jan 27th, 2007
- Location
- NH
- Posts
- 139
- Vehicles
- 2001 Audi TTQ TDI, 2001.5 B5 S4, 2002 2.7t AR 6spd
Allroad SAI secondary air pump removal DIY
05-05-2012 02:36 PM
#1
Anybody know where there is a good description to remove/replace the secondary air pump?
thx
-
Junior Member
- Join Date
- Nov 27th, 2011
- Location
- TX
- Posts
- 76
- Vehicles
- '04 allroad 2.7T, '10 A3 Quattro
05-08-2012 10:43 PM
#2
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
For advertising information click HERE
