anybody

[skillfullchap]

Anybody running a bov with c2 software instead of a dv and having any problems?

[snoop33]

Anybody running a bov with c2 software instead of a dv and having any problems?

Whats up bud, the problem with bov vs divert. The bov wont circurlate air back threw to mass air causing car to idle ****ed up,surge and STALL . Diverter valve will return discharge air to the mass air and then back to ECU so it can recalibrate to boost......Ecu's are always in a learn mode cause everyday if diff...( When u beating on it or grandma driving.)...Try a Diverter and see if it helps. SNOOP

[dubdriver808]

Whats up bud, the problem with bov vs divert. The bov wont circurlate air back threw to mass air causing car to idle ****ed up,surge and STALL . Diverter valve will return discharge air to the mass air and then back to ECU so it can recalibrate to boost......Ecu's are always in a learn mode cause everyday if diff...( When u beating on it or grandma driving.)...Try a Diverter and see if it helps. SNOOP

Wat bout the bov that recirculate??? Plus aint this the classified

[skillfullchap]

So would the bov cause the car to not start when the maf is connected cause when the maf is disconnected its starts up fine

[dubdriver808]

So would the bov cause the car to not start when the maf is connected cause when the maf is disconnected its starts up fine

dude I'm having that problem too.. its ur maf..

[skillfullchap]

i have two maf's a brand new one n also a used one n they both cant be bad

[skillfullchap]

tried div n still the same, cel light showing 00553 mass air flow open/short to circuit B+?

[dubdriver808]

tried div n still the same, cel light showing 00553 mass air flow open/short to circuit B+?

check ur wiring...

[A267MM]

u sure u have no boost leaks also ur running which software prior to jeff leaving C2?

[skillfullchap]

wiring is good cause the car is running now with the regular setup n stock computer and im running c2 software

[A267MM]

wiring is good cause the car is running now with the regular setup n stock computer and im running c2 software

when did u purchase the c2 tune? cause i had a huge issue with C2 when jeff left

[skillfullchap]

Like a month ago

[skillfullchap]

Freakin danny keeps telling me thats its something wrong with my wiring or my maf n i keep tellin him everything us fine cause everything was checked properly n its leading bac to the software so he sent an email to somebody so he gonna give me a call tomorrow or later today if the guy replys

[oldbetsy]

see if the maf is in backwards. my buddy had a vrt with a aftermarket intake and the maf could go both ways. see if that helps

[skillfullchap]

I checked that already, the computer is telling me thats is a short to power when all the wires are good

[A267MM]

I checked that already, the computer is telling me thats is a short to power when all the wires are good

pin 1345 go to ecm

what fault do u have?

[skillfullchap]

fault code 00553
on the maf
pin 1 ground
pin 2 reference
pin 3 power
pin 4 reference