it should. BE WARNED THAT YOU DO NOT TEST IT WITHOUT THE AIR BAG CONNECTED, otherwise you will have your airbag lights come back on......
+ Reply to Thread
Results 1 to 3 of 3
Thread: signal stalks
-
Member
- Join Date
- Feb 10th, 2005
- Posts
- 352
signal stalks
05-12-2012 07:18 PM
#1
I have a 1990 airbag and cruise control equipped cabbie. The signal stalk is broken, snapped clean off. I have a non-cruise control stalk set from my brother-in-laws old cabbie that works perfectly. Will the non-cruise set fit? My cruise control is broken so that is of no concern, I am just trying to get the signals/hi/low selector working again.
Thanks guys and gals
-
-
Member
- Join Date
- Feb 20th, 2004
- Location
- Atlanta Ga
- Posts
- 12,699
- Vehicles
- 90, 92, 93 Cabriolet
05-12-2012 09:18 PM
#2
Grounds, Grounds, Grounds Replace them things.
Divorces, Great Coffee, and Electrics, all start with GOOD Grounds.
Where are my grounds ?
-
Member
- Join Date
- Dec 13th, 2004
- Location
- Virginia Beach, VA
- Posts
- 4,727
- Vehicles
- 92 Cabriolet(RIP),89 Cabriolet, 03 A6 Avant, 93 Trek mtn. bike
05-12-2012 09:56 PM
#3
It will work fine. When you pull your old one out, compare the connectors to the replacement. you will see tab on the face for the horn, you may need to remove it so the pin doesn't interfer with the clock spring, I don't recall if it does. You don't need the pin as airbags have a seperate wire for the horn.
Sent from my Droid using an escape pod to Tattoine.
Originally Posted by mad8vskillz
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
For advertising information click HERE
