Wassup with a DIY and video of startup. ?
So I decided to spend about 14 bucks on a ESP button since I had space in my dash since my car don't got seat warmers and might I say it was worth the investment!! I used pins 3 and 4 and my ESP starts the car! Thought Id share so for those of you wanting that stock look without sacrificing your 12v charger.. In the works wiring uP for illumination
Last edited by dangxiii; 05-13-2012 at 05:49 PM.
I'll get one started when I get my laptop in working order but it was pretty simple just need the ESP switch some wiring, female connectors the flat ones, splicing connectors, and a relay all for about 20 bucks! Cheaper if u have your own wires and such.. But for those already with push to start I got everything wired up and in working order. Pins 1 and 2 on the switch are for the brown and blue wires which u can splice into from either your light vents or one of the harnesses for the thee switch, and pins 3 and 4 on the switch is for the negative wire and ignition switch wire.. I'll get something goin here soon for a more intense diagram but I'm lovin this mod!
Made a vid not a actual DIY vid but pretty much to show that it works and I'm not full of bull vid is processing on YouTube so I'll post the link as soon as its up.. For those that want a DIY tomorrow morning I'm gonna take everything apart so I can do a DIY
Last edited by dangxiii; 05-13-2012 at 02:14 AM.