I'm driving from the Hamilton area..
#1
If you're planning a cruise-in to SpringFling, post the details of when/where here.
I'll chime in for the guys/gals from Barrie, what say you?![]()
#3
Last year we did a small cruise from the Shell station @ Yonge Street / York Mills (One block south of the 401)
I think a few of us planned to do that again, will be fairly early like 8am'ish.
I'll edit this in a bit and firm up.
#4
Ill be driving down from Barrie![]()
R32 Registry#867 WiTW '13
Follow me on Instagram & TheTechSource YouTube Page
PM Me about if you need Vagcom scan in the GTA or Barrie area
- 2002 Vw Jetta1.8T
- 2004 Vw Golf .:R32
#6
I would imagine we will either be meeting at KC or at Yorkdale. Feel free to meet us there if you are in the East-ish area.![]()
#10
like last year...will roll with the mayhem again..!!!!!![]()
AIRSOCIETY
scrapedcrusaders.com
#11
i think we should be there earlier than 8.... spring fling will get more ppl this year.!
AIRSOCIETY
scrapedcrusaders.com
#12
I'm down for whenever.
Also to add to Chase's post, nothing is set in stone yet but we've been thinking about arranging a MK1 get together for after the show, go do a photo shoot then grab some beers. Something for all the MK1 drivers to keep in mind.![]()
#13
A bunch of us will be meeting at the Tims on dundas/403 and cruising down. Feel free to join the party..![]()
PM ME FOR ALUMINUM SHIFTER BUSHINGS FOR YOUR VW/AUDI
My Build Thread: The-Concept-Windsor-Progression-Thread
http://www.vr6coilbracket.com : MSD IGNITION
#14
/// VRSociety Member #298 /// Mk2 Milita-VR6 Battalion-2dr Regiment /// Instagram @scottyvr6 ///
My 2.9L BVH build and the machine shop #%@- up that almost ruined it all.
#15
We intend to be among the first there to get the same spots we had last year![]()
#16
Didn't we roll from KC to Yorkdale, then to the meet?
Or am I combining two separate shows![]()
Scraped.Crusaders.
slalom coupe
#17
^^^ Jitterbug was from Yorkdale last year, no?
/// VRSociety Member #298 /// Mk2 Milita-VR6 Battalion-2dr Regiment /// Instagram @scottyvr6 ///
My 2.9L BVH build and the machine shop #%@- up that almost ruined it all.
#18
#20
I'm good with where ever central really, I just know that the larger the GTG cruise, the later it usually leaves and I'd like to make sure I'm nice and early.![]()
#21
#22
Last year you guys were the "late peeps." The MK1 bunch showed up before you guys did.![]()
#25
#26
Scraped.Crusaders.
slalom coupe
#28
Last edited by ToplessBunny85; 05-16-2012 at 11:54 PM.
#30
Hahahah.
So it looks like the MK1 Mayhem crew will be gathering at the Shell gas station at Yonge and York Mills. We will be meeting around 8:45-9:00 and leaving at 9:30 so don't be late!Anyone is welcome to join us, you don't have to drive a MK1.
Last edited by ToplessBunny85; 05-24-2012 at 12:51 PM.
#31
Kitchener - Waterloo
I think everyone is meeting at Moose Winooski's at Sportsworld, not sure what time though
low n' slow
#34
Mind posting details when you find put please?
“Life itself is a race, marked by a start, and a finish. It is what we learn during the race, and how we apply it, that determines whether our participation has had particular value. If we learn from each success, and each failure, and improve ourselves through this process, then, at the end, we will have fulfilled our potential and performed well.”
- Dr. Ferdinand Porsche
#35
PM ME FOR ALUMINUM SHIFTER BUSHINGS FOR YOUR VW/AUDI
My Build Thread: The-Concept-Windsor-Progression-Thread
http://www.vr6coilbracket.com : MSD IGNITION