New bolts + Vice-grips.
Upgrading the stock rear brakes on my 01 Jetta to a GLI setup. I have the carriers, calipers, new rotors and some nice HPS pads.
NOW HERE'S THE PROBLEM:
The carrier bolts. Those little 8mm ****heads of bolts. I've used a TON of PB Blaster and one of them was already previously stripped before I started the process....
What else can I do? I have the car jacked up in the driveway working in the rain. No lift, and I have an impact wrench, but no way of getting it in there.