wheel fitment ?

[euroluv69]

tried searching but couldn't really find anything....but just wondering if a 8.5 wheel with a 32 offset would be a bit much and to much of an aggressive offset?? seems like most are running around the 40s for an offset. im looking for a flush to a little poke but i dont want to run a 205 tire to make it fit

[PSU]

17s or 18s?

My Sawblades were 17x8.5 ET31 and I ran 215/45s.

[euroluv69]

looking at either 18s or 19s

[PSU]

19s are a no go.

18s will be possible, but that's a rough fitment.

18x8.5 ET35 with 215/40s is ideal, IMO.

[AWPower]

What PSU said. The fitment is aggressive but it wil work it they are 18s and with the right tire size

[avenue.]

215/35 if you wanna go low

[Howboutcha C'mon]

19s are a no go.

18s will be possible, but that's a rough fitment.

18x8.5 ET35 with 215/40s is ideal, IMO.

ET35 as far as looks? I thought the general opinion was that ET45 was the magic number for performance.

[noitslucasngo]

8.5 ET32 is doable you just gota mess with the camber....

[germanbycar]

8.5 ET32 is doable you just gota mess with the camber....

This. Or it won't look right and it'll rub.

[PSU]

ET35 as far as looks? I thought the general opinion was that ET45 was the magic number for performance.

ET45 is too mild for me.

I prefer a nice aggressive look.

ET45 with 225/40s is good for those wanting more tread on the road though.

[infiniteecho]

ET45 with 225/40s is good for those wanting more tread on the road though.

This is what I run.

You know where to find pics. I don't think I need to whore anymore.

[Howboutcha C'mon]

Thanks for clarification

[noitslucasngo]

This. Or it won't look right and it'll rub.

im running 19x8.5 +32 with a 215 35 tire

[BlixaBargeld]

Go 255/35 on a 8.5 - 18 ET45

[euroluv69]

8.5 ET32 is doable you just gota mess with the camber....

anyone have a pic of this size...just to see what it looks like???

[MaxKenyon]

9.5 all around.... possible or not?

[crookedR32]

ET45 is too mild for me.

I prefer a nice aggressive look.

ET45 with 225/40s is good for those wanting more tread on the road though.

this is my set up and im pretty damn low and have no issues but wheels are deff tucked so if you want a more flush look may want different offset...all depends on how low you wanna go and if your willing to risk your fenders lol

9.5 all around.... possible or not?

i had saw blades that were 9.5 all the way around and rears were nice but a no go up front (i didnt know anything about the car and bought them cuz i got them rly cheap and then test fit and realized i bit off more than I could chew)...would have destroyed my fenders