email pics of the shell and header to jordanmartin86@gmail.com please. Im local.
+ Reply to Thread
Results 1 to 35 of 43
-
Junior Member
- Join Date
- Feb 1st, 2012
- Location
- San Diego
- Posts
- 65
- Vehicles
- 1984 GTI MK1 1.8L
MK1 GTi Rabbit 16v Swap stuff + more...Shipping avail..Scirocco..passat...9a..1.8L PL
05-21-2012 08:56 PM
#1
NEW 11/13/2012!! IF ANYONE CAN MAKE IT TO COLORADO WITH $1700 ALL OF THIS IS YOURS. WILL NOT SHIP FOR THIS PRICE.
Un-expectidly got a job offer in Colorado so I moved up here. Almost have a complete 16v setup (2.0 aba block, 1.8L scirocco head, PL, and more) Any questions just hit me up, offer away! Here is a list and pictures of what I have for sale...
-Rebuilt ABA block blueprinted and balanced with je pistons and arp everything else...bored .060 over bore (NEVER USED) $1000 ($1100 shipped as long as you dont live in BFE)
-rebuilt 1.8L scirocco head, blueprinted and balanced with new valve gaskets(NEVER USED)$400 ($450 shipped, once again, as long as you don't live in BFE)
-gasket set for motor (goes with motor)
-TT race header with custom o2 sensor location $300 ($about $350 shipped, have to check)
-ARP stud set for the motor swap $100 ($100 shipped)
Looking for local pickup, can deliver in the greater Denver area. I can also ship it through UPS freight, but be reasonable. IF I have to ship it to a country location shipping goes up a lot. Perfect for someone looking to start, or finish a project. Well, thanks for looking and lets get this stuff sold!! Message me on vortex, or text...7756222321
rebuilt scirocco head, this thing is so clean!!!
rebuilt aba block, over bore, also VERY CLEANNN
Complete gasket set for motor swap
arp studs for the motor swap
tt race header for pl head (never used) lowered 02 sensor mount for better reading
Last edited by bmxmk1; 11-13-2012 at 06:00 PM.
-
-
Member
- Join Date
- Nov 26th, 2009
- Location
- So Cal
- Posts
- 1,453
- Vehicles
- 80 rabbit
05-21-2012 09:07 PM
#2
-
Junior Member
- Join Date
- Feb 1st, 2012
- Location
- San Diego
- Posts
- 65
- Vehicles
- 1984 GTI MK1 1.8L
-
Junior Member
- Join Date
- Feb 1st, 2012
- Location
- San Diego
- Posts
- 65
- Vehicles
- 1984 GTI MK1 1.8L
-
Member
- Join Date
- Dec 11th, 2006
- Posts
- 365
-
Member
- Join Date
- Mar 5th, 2011
- Location
- Florida
- Posts
- 332
- Vehicles
- 01 Gti 1.8t,89 mk2 gti, 91 mk2 gli, jeep wrangler
05-22-2012 02:06 PM
#6
Do you have the dizzy/airbox Der up with injectors if so lmk I need hole set up
Sent from my ADR6400L using Tapatalk 2
-
Junior Member
- Join Date
- Feb 1st, 2012
- Location
- San Diego
- Posts
- 65
- Vehicles
- 1984 GTI MK1 1.8L
05-22-2012 07:39 PM
#7
manandfox: complete harness with knock box, ecu, and ignition set up labled and all...$60 picked up
E_rod: I have the whole setup, $30 picked up
If you guys need the stuff shipped I will have to go check the prices!
-
Member
- Join Date
- Dec 24th, 2008
- Posts
- 956
-
Junior Member
- Join Date
- Feb 1st, 2012
- Location
- San Diego
- Posts
- 65
- Vehicles
- 1984 GTI MK1 1.8L
05-23-2012 11:40 AM
#9
A arms shipped will be around $60...I have to get a shipping cost for sure. Also, morning bump!
-
Junior Member
- Join Date
- Feb 1st, 2012
- Location
- San Diego
- Posts
- 65
- Vehicles
- 1984 GTI MK1 1.8L
-
Member
- Join Date
- Jun 28th, 2008
- Location
- San Diego, Ca
- Posts
- 3,537
- Vehicles
- 2012 Audi A4, 2006 VW Jetta GLI, 1989 MK2 GTI 16v
05-23-2012 10:25 PM
#11
Ce1 or ce2 wiring harness?? Interested lemme know.
2006 BMP VW JETTA GLI DSG some coils, some bolt ons and some wheels.
1989 VW GTI 2.0 16v some coils, some bolt ons, and some wheels.
2012 Audi all stock, its hers. she dont want me messing with it...yet.
-
Junior Member
- Join Date
- Feb 1st, 2012
- Location
- San Diego
- Posts
- 65
- Vehicles
- 1984 GTI MK1 1.8L
-
Member
- Join Date
- Nov 28th, 2004
- Posts
- 1,040
- Vehicles
- 81 rabbit ABF swap, 2009 Ducati 1198, 2008 Ducati Hypermotard
-
Member
- Join Date
- Jun 13th, 2011
- Location
- The Dirty.
- Posts
- 158
- Vehicles
- 84' Rabbit
05-25-2012 01:34 PM
#14
How much For just knock box and corresponding wires shipped to Hawthorne, ca 90250
-
Junior Member
- Join Date
- Feb 1st, 2012
- Location
- San Diego
- Posts
- 65
- Vehicles
- 1984 GTI MK1 1.8L
05-25-2012 07:00 PM
#15
Wiring harness I will only sell complete, and Pm for tank responded!!
-
n00b
- Join Date
- May 25th, 2012
- Posts
- 8
do you have any interior trim ? blue ?
05-25-2012 08:10 PM
#16
do you have any interior trim pieces blue ?
-
Member
- Join Date
- Mar 15th, 2009
- Location
- New Philthy OHIO,
- Posts
- 763
- Vehicles
- '84 GTI '81 diesel 2door '02 Focus
05-26-2012 09:54 PM
#17
Do you have the 16v airbox/dizzy and fuel injection lines? to 44663? and how much for the upper intake manifold shipped?
Last edited by Fusor2; 05-26-2012 at 09:57 PM.
Originally Posted by rod_knock
-
Junior Member
- Join Date
- Feb 1st, 2012
- Location
- San Diego
- Posts
- 65
- Vehicles
- 1984 GTI MK1 1.8L
05-27-2012 01:19 PM
#18
No trim for the car. I only have the 8v dizzy/airbox and lines, not the 16v...
Getting close to move date, so if interested in ANYTHING its this week or never...
-
Member
- Join Date
- Mar 15th, 2009
- Location
- New Philthy OHIO,
- Posts
- 763
- Vehicles
- '84 GTI '81 diesel 2door '02 Focus
05-28-2012 03:34 PM
#19
40 bucks shipped for the scirocco upper intake manifold ? to 44663
Originally Posted by rod_knock
-
Semi-n00b
- Join Date
- Jun 5th, 2012
- Location
- pennsylvania
- Posts
- 19
- Vehicles
- 1984 volkswagen GTI
badges
06-20-2012 10:01 PM
#20
hey man, do you think that i could buy the badges off the hatch, i need the ones for mine, and i cant find any individual, especailly the volkswagen one. thanks
-
Member
- Join Date
- Dec 30th, 2011
- Location
- Eugen Oregon
- Posts
- 114
- Vehicles
- 85 golf
-
Junior Member
- Join Date
- Feb 1st, 2012
- Location
- San Diego
- Posts
- 65
- Vehicles
- 1984 GTI MK1 1.8L
06-21-2012 08:22 PM
#22
Sorry guys, manifold and control arms sold, along with the car and badges. I have the headers, bottom end, sway bar, and engine harness left
-
Junior Member
- Join Date
- Feb 1st, 2012
- Location
- San Diego
- Posts
- 65
- Vehicles
- 1984 GTI MK1 1.8L
07-24-2012 11:11 AM
#23
bump! down to only motor stuff, but it is all BRAND NEW. So this reflects everything I still have available. Who needs to finish that summer project in the back?
-
Junior Member
- Join Date
- Feb 1st, 2012
- Location
- San Diego
- Posts
- 65
- Vehicles
- 1984 GTI MK1 1.8L
-
Member
- Join Date
- Jun 15th, 2007
- Location
- San Antonio, TX
- Posts
- 1,135
- Vehicles
- 09 TiG 6MT and a 1990 Cabriolet
08-21-2012 05:26 PM
#25
Still have the headers?
My Build
http://forums.vwvortex.com/showthrea...s-Build-Thread
Originally Posted by ih8erickempf
Im a dude and drive an EA edition cab w/ teddy bear wheels... sometimes you just gotta have some fun at the expense of the stereotype
-
Junior Member
- Join Date
- Sep 11th, 2010
- Location
- Northern California
- Posts
- 59
- Vehicles
- 84 Rabbit GTi
-
Junior Member
- Join Date
- Feb 1st, 2012
- Location
- San Diego
- Posts
- 65
- Vehicles
- 1984 GTI MK1 1.8L
08-22-2012 04:18 PM
#27
"DT EXP
Still have the headers?"
PM Sent!
Thanks for the bump jskeeters!
-
Member
- Join Date
- May 30th, 2007
- Location
- Jamul, Ca
- Posts
- 833
- Vehicles
- 89 1.8l Crabbit (RIP), 79 Rabbit C "Diesel" 2.0l, 96 Jeep Cherokee 4.0l 4x4 tractor on 33's
08-23-2012 11:34 AM
#28
Holy cow! That looks like the perfect setup for my 8v build that I have been plotting out. I am making the educated guess that it was an early ABA with the forged internals? Any chance you have the dizzy to go with that knock box setup?
Last edited by flowmastergfunk; 08-23-2012 at 11:37 AM.
-
Member
- Join Date
- May 30th, 2007
- Location
- Jamul, Ca
- Posts
- 833
- Vehicles
- 89 1.8l Crabbit (RIP), 79 Rabbit C "Diesel" 2.0l, 96 Jeep Cherokee 4.0l 4x4 tractor on 33's
-
Junior Member
- Join Date
- Feb 1st, 2012
- Location
- San Diego
- Posts
- 65
- Vehicles
- 1984 GTI MK1 1.8L
09-12-2012 10:46 AM
#30
Bump! I checked with UPS and I can ship any of this stuff. I added shipping prices to the items. If you are interested in shipping please be reasonable. Shipping this stuff to the middle of nowhere costs a ton more. I am willing to ship anywhere, but if it's a little obscure shipping price may go up. Thanks everyone!
-
Member
- Join Date
- May 30th, 2007
- Location
- Jamul, Ca
- Posts
- 833
- Vehicles
- 89 1.8l Crabbit (RIP), 79 Rabbit C "Diesel" 2.0l, 96 Jeep Cherokee 4.0l 4x4 tractor on 33's
09-12-2012 11:20 AM
#31
I'll take those studs for now! Still want the block but I am doing some pondering...I'll PM you
-
Junior Member
- Join Date
- Feb 1st, 2012
- Location
- San Diego
- Posts
- 65
- Vehicles
- 1984 GTI MK1 1.8L
-
Member
- Join Date
- Dec 6th, 2009
- Location
- Ladysmith, WI
- Posts
- 3,308
- Vehicles
- '79 Rabbit, '84 Rabbit, 2012 GTI
09-25-2012 03:41 PM
#33
Ooooh, this tickles my fancy. Maybe in a few weeks...
-
Member
- Join Date
- Jul 6th, 2003
- Location
- "the ridge"
- Posts
- 4,837
- Vehicles
- Mk2 GTI 16v, Mk1 GTI 16v
-
Junior Member
- Join Date
- Feb 1st, 2012
- Location
- San Diego
- Posts
- 65
- Vehicles
- 1984 GTI MK1 1.8L
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
For advertising information click HERE
