home brew custom exhausts!

[taverncustoms]

alot of people do custom exhausts, lets see yours! please no off the self kits like apr/TT/etc..
if you got sound clips that would be cool to but lets get some pictures.

[Dowski12]

Haha...give me a week and I'll post up a one of kind

[Kacz07]

I should have something to add to this thread soon, but need to get my car inspected first.

[DougLoBue]

I have a folder at home of about 10 different custom setups. I'll share later but won't be able to give credit or details.

[G'D60]

In for something custom

[sTT eV6]

Here is my TT with custom turbo back an electric bypass flap..

before that i went stealth with a single exit..

Steve

[taverncustoms]

Nice
i just did a muffler delete nothin worth showing but sounds good

[1fast2liter]

Here is my TT with custom turbo back an electric bypass flap..

before that i went stealth with a single exit..

Steve

What mufflers you using?

Sent from my Motorola Electrify using Tapatalk 2

[Forty-six and 2]

What tips are those?

[miller6323]

3" from the cat and 16" backwards glasspack.

[wrestler4life521]

Nice, I like this thread, about to embark on my own custom exhaust journey. Post some sound clips of your setup too!

[HolvTT]

http://forums.vwvortex.com/showthread.php?t=5619705

In my thread


Poor grammar and spelling brought to you by the iPad

[BrokeTT]

Has anybody run an electric cutout with the stock exhaust? I plan on doing this after I get my 42dd race dp.

[Tom333]

3" from the cat and 16" backwards glasspack.

have the same set-up with oem resonator... drone fiesta @ 2.5k-3.5k rpm
aside from that it sounds good.

[sTT eV6]

What tips are those?

The tips are a 100mm slash cut returned.
The system is a full 3" turbo back with 2 straight through mufflers.
Pipewerx make most of their own stuff in house.

Here is a sound clip of the electric cutout activated then i close it towards the end of the vid..
http://youtu.be/WaabhQ7qmco
Here is another vid where i open the cutout towards the end of the vid..
http://youtu.be/lA-besfd0o0
Steve

[miller6323]

have the same set-up with oem resonator... drone fiesta @ 2.5k-3.5k rpm
aside from that it sounds good.

Lol straight pipes are the only way to go.

[EvilVento2.oT]

i have a 3 inch turboback and the stock rear muffler , not to loud and sounds great

[benocehcap]

The tips are a 100mm slash cut returned.
The system is a full 3" turbo back with 2 straight through mufflers.
Pipewerx make most of their own stuff in house.

Here is a sound clip of the electric cutout activated then i close it towards the end of the vid..
http://youtu.be/WaabhQ7qmco
Here is another vid where i open the cutout towards the end of the vid..
http://youtu.be/lA-besfd0o0
Steve

WoW!!!
this is the best sound i have heard yet from a aftermarket exhaust on a TT. They are so hard to get it right. Most of them sound like a tractor

I thought the best was "Eisenmann" but you beat it by miles
awesome awesome sound dude!!

do you have a link to where i can get one with the electric cutout? or i have to email Pipewerx?

[EvilVento2.oT]

here is a pic of mine , it was a home made 3 inch dp and no cat . i find the sound great , no drone and good sound ..
http://s88.photobucket.com/albums/k1...t=DSC_1858.mp4

[Marcus_Aurelius]

- 42 DD downpipe
- 2 barrel type 3" resonators
- straight through Magnaflow muffler
- mandrel bends throughout
- single driver side exit
- 180 rear valence to cover the empty hole

I wanted nothing but the highest possible flow, so no compromise, splits, restrictive chambered mufflers, crushes and unnecessary bends here.

[sTT eV6]

WoW!!!
this is the best sound i have heard yet from a aftermarket exhaust on a TT. They are so hard to get it right. Most of them sound like a tractor

I thought the best was "Eisenmann" but you beat it by miles
awesome awesome sound dude!!

do you have a link to where i can get one with the electric cutout? or i have to email Pipewerx?

My cutout is from the States..here is a link to the ebay shop i got it from..
http://www.ebay.co.uk/sch/badlanzhpe...&_trksid=p3686
Steve

[Kacz07]

WoW!!!
this is the best sound i have heard yet from a aftermarket exhaust on a TT. They are so hard to get it right. Most of them sound like a tractor

I thought the best was "Eisenmann" but you beat it by miles
awesome awesome sound dude!!

do you have a link to where i can get one with the electric cutout? or i have to email Pipewerx?

He also has the 3.2, which sounds dramatically different than the 1.8t.

[sTT eV6]

He also has the 3.2, which sounds dramatically different than the 1.8t.

3.3....

Steve

[benocehcap]

My cutout is from the States..here is a link to the ebay shop i got it from..
http://www.ebay.co.uk/sch/badlanzhpe...&_trksid=p3686
Steve

Thanks mate
Can you please take a pix of the install? Close up on the exhaust flapper and the interior switch?
thank you so much for the help

[sTT eV6]

Thanks mate
Can you please take a pix of the install? Close up on the exhaust flapper and the interior switch?
thank you so much for the help

Not got much in the way of photo install and the cabin switch is a 3 position spring return, to centre.. and ive put in the change tray under the arm rest..


Steve

[bklnstunt718]

i want an electrical flap

[Krissrock]

it isn't homebrew, but is definitely is custom...



http://youtu.be/ek_KQjl497M

http://youtu.be/B1UWbpiYlyg

[Kacz07]

it isn't homebrew, but is definitely is custom...



http://youtu.be/ek_KQjl497M

http://youtu.be/B1UWbpiYlyg

Ha. I was bs'ing w Vince at the shop yesterday. He tuned my built NA 350z. How r u tuned? He mentioned getting into APR dealer stuff.

[Krissrock]

Ha. I was bs'ing w Vince at the shop yesterday.

R/T Vince?

Unitronic 1+

[Kacz07]

R/T Vince?

Unitronic 1+

Ha, yeah. He's a cool guy. That place is killing' it.

[Krissrock]

I don't think i've been over there since the Dyno day in the video...2009. it's been a while.
it would cool if he did Unitronic tunes of course.

I like the place, but the last two times I was there i ended up with things to fix afterwards.
After the dyno day, my headlights went wachky, and i found that the sensor on the rear control arm was broken off...the dyno tie-down must have been on it cause the bar on the sensor was completely gone.
I had an alignment and they ripped up my vinyl rim stripe. Not a biggy, but i just had an alignment last week somewhere else and they didn't damage the stripes at all. And I have red Alcantara on my steering wheel...they don't wash their hands or wear gloves when inside the car, so I end up having to clean the Alcantara afterwards too (which is not easy).
Minor things I guess. Especially compared to GLC which scratched ALL of my wheels when putting on the tires....which is why I rock the vinyl rim stripe to cover the scratches.
I guess I'm just a stickler about shops doing collateral damage. You accept that because it happens a lot, but it doesn't have to. That's why I gotta give it up to Nate Dog Creations who had my car for 3 months and took care of it like it was his own. He truly understands that these cars are our babies and should be treated as such.

I'm in no way trying to trash R/T. I like the place and I'd give them my business in the future.

I was really considering going over to R/T for the Cinco De Dyno Day...did you go?

[20v master]

Max, sent you a PM regarding this picture.

[cincyTT]

I wanted nothing but the highest possible flow, so no compromise, splits, restrictive chambered mufflers, crushes and unnecessary bends here.

So not like this?!?

[IMG]

here is some pics of the system. total weight is about 3 lbs.

Mines cat less with a 5" magna flow round and large magna flow oval. Both straight through 3"

[20v master]

[DougLoBue]

ah yessss stjacket aka choptt

I miss that guy more than cablekid who just had bad taste. stjackt had balls, sawsall balls.