#71
I seriously doubt that... They have bigger fish to fry and considering their limited resources I'm sure they're more worried about this guy
than these guys
Haha, its not really in Mexico.... There's a place called "Mexico" in SFL where people street race.
People race there ALL the time. Even during the day. No one gives a crap because it's in the middle of nowhere and takes some time to get to.
#72
#75
#76
I do coilover installs, retrofits, audio, fender rolling and other light maintenance in South Jersey. Eastwood fender roller for rent. PM me with questions
| 3076r | Unitronic 630 | Siemens 630cc | IE rods | OEM largeport IM | Custom 3" TBE | Southbend Stage 3+ | Hotchkis F&R sways |
#79
#80
lol
Sent from my MB860 using Tapatalk 2
#81
My Thread Fk AK Coilovers, Full 3" Exhaust, Custom FMIC, Forge Evo14 BOV, Forge Unos MBC, Forge Throttle Body Hose, GodSpeed Aluminum Radiator, Prothane Dog Bone Mount, BFI STG 1 Eng/Trans Mounts, Sachs VR6 Clutch Kit, TT Short Shifter, Siemens 630s, Walbro 255, DBB Garrett 50 Trim Turbo Kit, Eurodyne 630cc MAFLESSPAGPARTS FTW -- STEVEBILT.COM -- Integrated Engineering -- FourSeasonTuning.com Don't Buy Anything From *ChunkyPeanuts*
#82
My Thread Fk AK Coilovers, Full 3" Exhaust, Custom FMIC, Forge Evo14 BOV, Forge Unos MBC, Forge Throttle Body Hose, GodSpeed Aluminum Radiator, Prothane Dog Bone Mount, BFI STG 1 Eng/Trans Mounts, Sachs VR6 Clutch Kit, TT Short Shifter, Siemens 630s, Walbro 255, DBB Garrett 50 Trim Turbo Kit, Eurodyne 630cc MAFLESSPAGPARTS FTW -- STEVEBILT.COM -- Integrated Engineering -- FourSeasonTuning.com Don't Buy Anything From *ChunkyPeanuts*
#83
I chased and rand down some guy in a bike on the way home. He couldn't shake me. Even dropping gears and going full lay down for aero. I actually started reeling him in until we stopped at a speed where brakes still work. Probably a 600 or something, but that was still fun.
So, we see more happened on my way home than has happened in this thread, or the threads prior for the past 4 months.
Just sayin.....
![]()
#84
#86
#87
Hey you guys calm down about the 2.0l's with air bags...your going to hurt my feelings lol....I dont wear skinny jeans though![]()
#88
#89
#90
I do coilover installs, retrofits, audio, fender rolling and other light maintenance in South Jersey. Eastwood fender roller for rent. PM me with questions
| 3076r | Unitronic 630 | Siemens 630cc | IE rods | OEM largeport IM | Custom 3" TBE | Southbend Stage 3+ | Hotchkis F&R sways |
#91
I think i've seen your build thread or pics of your stuff somewhere.
There is nothing wrong with form, when function is there. Me personally, I like simple. My Jetta is a 200k mile beat up car that needs camber/caster plates to just align straight -- even with a new rear axle beam and straight subframe, control ars, bushings etc.
Keep it running right, is my motto, and make it move/turn.
My Audi? Going to be a little prettier, still more function.
If you can achieve both, that is awesome.
#92
#93
Even if they look good, does the ecu know what lb per minute the turbo/motor is ingesting?
Psi doesn't = lb per minute.
I really truly think there's a legit reason a maf gives you dramatic power on me7.
Timing is load based, load is determined primarily by MAF, or air mass. Lb per minute = mass
#94
Also I may be wrong but can anyone show me a factory turbo car that's solely speed density?
1979 turbo trans am does not count.
#96
My Thread Fk AK Coilovers, Full 3" Exhaust, Custom FMIC, Forge Evo14 BOV, Forge Unos MBC, Forge Throttle Body Hose, GodSpeed Aluminum Radiator, Prothane Dog Bone Mount, BFI STG 1 Eng/Trans Mounts, Sachs VR6 Clutch Kit, TT Short Shifter, Siemens 630s, Walbro 255, DBB Garrett 50 Trim Turbo Kit, Eurodyne 630cc MAFLESSPAGPARTS FTW -- STEVEBILT.COM -- Integrated Engineering -- FourSeasonTuning.com Don't Buy Anything From *ChunkyPeanuts*
#97
You would think, that after writing the beginnings of the DIY on how to tune your own 1.8t using WinOLS that I would know the horrors of running MAFless. So, yes, my recommendation is to put a MAF back on it.
But, if he would show me a log, with timing, fuel, load values as well, then we would really see whats wrong. Then, in and of itself, we would see proof that the MAF would help in those sectors where readings are off, or skewed. Instead of calling him out, let him prove his own mistake.
Cars, VW's I really mean, can run without a MAF because it is a failsafe. And thats what it is, a failsafe. Yes, they can run, there are many out there that just dont have them because "racecar", but when the entire Bosch system architecture is based on that load calculation including ABS, ESP, and nearly all systems that make the car go, why take it out. So dont take this out on me.
Show us your logs. We want to see how well tuned that car is.
#98
calloway turbo cars, volvo, porsche from the 70's, the saab monster from 83..
Sent from my SPH-D710 using Tapatalk 2
:HOMEGROWN MOTORSPORTS:1:4.9 VulcanWorks SuaSponte #13Dead Rabbits 1.8l20vAEB3651GonzoFerrera1000cc1552.billet3071rSE M80mmAWIC.H&R.PagParts.Snow034clutchmasters.IE.198 4JettaGLi
#99
My Thread Fk AK Coilovers, Full 3" Exhaust, Custom FMIC, Forge Evo14 BOV, Forge Unos MBC, Forge Throttle Body Hose, GodSpeed Aluminum Radiator, Prothane Dog Bone Mount, BFI STG 1 Eng/Trans Mounts, Sachs VR6 Clutch Kit, TT Short Shifter, Siemens 630s, Walbro 255, DBB Garrett 50 Trim Turbo Kit, Eurodyne 630cc MAFLESSPAGPARTS FTW -- STEVEBILT.COM -- Integrated Engineering -- FourSeasonTuning.com Don't Buy Anything From *ChunkyPeanuts*
#100
#101
My Thread Fk AK Coilovers, Full 3" Exhaust, Custom FMIC, Forge Evo14 BOV, Forge Unos MBC, Forge Throttle Body Hose, GodSpeed Aluminum Radiator, Prothane Dog Bone Mount, BFI STG 1 Eng/Trans Mounts, Sachs VR6 Clutch Kit, TT Short Shifter, Siemens 630s, Walbro 255, DBB Garrett 50 Trim Turbo Kit, Eurodyne 630cc MAFLESSPAGPARTS FTW -- STEVEBILT.COM -- Integrated Engineering -- FourSeasonTuning.com Don't Buy Anything From *ChunkyPeanuts*
#103
My Thread Fk AK Coilovers, Full 3" Exhaust, Custom FMIC, Forge Evo14 BOV, Forge Unos MBC, Forge Throttle Body Hose, GodSpeed Aluminum Radiator, Prothane Dog Bone Mount, BFI STG 1 Eng/Trans Mounts, Sachs VR6 Clutch Kit, TT Short Shifter, Siemens 630s, Walbro 255, DBB Garrett 50 Trim Turbo Kit, Eurodyne 630cc MAFLESSPAGPARTS FTW -- STEVEBILT.COM -- Integrated Engineering -- FourSeasonTuning.com Don't Buy Anything From *ChunkyPeanuts*
#105