mk3 swaybar endlink bushings?

[vesh]

does anybody make poly bushings for the sway bar endlinks for a mk3 vr6?

[meboice]

I've never seen such a thing. Try Powergrid if you want something very strong. These are typically as heavy as stock endlinks but their action and design are built for the track. These are OEM type design - ball joint type design. Some folks use heim joints but non-offset heim joints have an articulation range of about half the ball joint design. This is very important if the endlink attaches to a strut that spins.

[vesh]

checked powergrid and they dont have any mk3 applications.

[Old Windy]

Check Prothane. They have a full poly kit.

[vesh]

prothane does have the bushings. thanks!