SWAP!!!

[canadian_rabbit_16v]

For u guys that have swaped mk2's

CAR/ 92 golf 1.8 8v ( cali digi 1)

if i wanted to swap out my 1.8 for a 2l ABA could i just run the engine hanress i have now and injectiong on the aba or ould it be much easier to swap the complete aba with harness engine harness!! since will be plug and play!!

P>S yes ive searched and searched but every dant thread gets so off topis or people just argue the fact its garbage and just buy MS...thats there solution to everything!!

thanks guys

[AnAgentOrange]

Let me first start with this assumption. You have a full ABA motor head and all that you want to put into your Mk2, correct?

If that's the case, just get the whole harness with ECM. If you're already tearing everything from your motor out, it's not all that much harder to splice the 2 wires and put the entire system in. Easier than hybriding your current fuel injection to that ABA for sure

[Glegor]

theres 2 ways to do it..

you can use your stock injection, and head on the 2.0L bottom end, and it will basically look like its supposed to be there..

or you could transfer the ENTIRE fuel system of the 2.0 into your car..