i have an 020 (acn 13095) tran with a mk3 speedo sensior, the mk2 reverse switch, and 100mm out-puts to fit the mk3 hubs.
this tran was from a mk2, i used this tran with a set-up that had full intake, port polished-rebuilt head w/ 268 cam w/ chip, underdrive, and full exhaust. the different in gearing really made a differance in the car. output seals were replaced when i installed the 100mm outputs.
all gears are functioning with no grinding. smooth reverse with tipical tran noise pitch. this tran is from 85. im sure your going to as how many miles are on it. honestly i have no clue. i think it was in a 85 rabbit. yessss there were rabbits in 85, just a grand total of 500 before the name change. i changed the gear oil each swap that i used the tran. in. i still have a low level in it and hand turn the gears to keep gears lubed. last swap it was used for i would say 30,000 miles. clean lube still, no chunks or loss metal shavings.
i live in glen rock pa., southern york. i would like 300.oo OBO. this is picked up. i could deliever, but would have to charge 10% for gas and time and will only go 50 miles one way, unless other agreements are made. CASH OR MONEY ORDER ONLY.
i have a used flywheel as well that could be used to resurface or lighten.
My name is Joksan. I am interested and BADLY in need of a transmission. I have a question, does this tranny fit an Mk3 Golf 2.0 ABA engine. It is my daily driver and my reverse is grinding. If it is a direct bolt on, I can pick up tomorrow afternoon. Let me know please. Thanks.
Sorry my notifications have not coming to my email. I still have the tranny. Yes it will bolt up. You will need a 220mm clutch and flywheel for a 85'. Laast time i got a clutch package for this tran it ran around 140.