VWVortex


+ Reply to Thread
Results 1 to 9 of 9

Thread: BBM V 250 Chip

  1. 06-23-2012 09:27 PM #1
    Has anyone run the BBM 250 v chip yet? What were your thoughts on it? Im going to order it monday just want to get some feedback from other g60 folks. and i also want to eun 62mm pulley with the 42lbs injectors.

  2. 06-25-2012 09:17 PM #2
    Well i ordered it today. Thanks Jason @ BBM for the hook up today ordering all that stuff. Looking forward to running that New Chip & Injectors

  3. 07-01-2012 10:19 PM #3
    Is anyone running BBM stage 4 chip and 62mm pulley have any lean issues?

  4. Member mk2stutter's Avatar
    Join Date
    Sep 29th, 2003
    Location
    North Carolina
    Posts
    927
    07-02-2012 02:50 PM #4
    Are you running lean the whole time or is it leaning out as you climb in rpm

  5. 07-02-2012 03:34 PM #5
    Just as i climb. in the higher RPM.
    Last edited by jeffs vw; 07-02-2012 at 03:39 PM.

  6. Member mk2stutter's Avatar
    Join Date
    Sep 29th, 2003
    Location
    North Carolina
    Posts
    927
    07-02-2012 09:56 PM #6
    You check fuel filter what kind of fpr?

  7. 07-02-2012 10:24 PM #7
    i have the adjustable BBM. But i havent checked my Fuel filter. I did run race gas MS109 in my car before and my other filter had so much stuff on it from the gas tank. and changed to a stock filter. I m thinking im gonna change it to a new one since my car did sit for over a year with that race gas in it. Thanks for the advice

  8. Junior Member
    Join Date
    Oct 9th, 2010
    Location
    Puerto Rico
    Posts
    54
    Vehicles
    1987 jetta coupe g60
    07-02-2012 11:10 PM #8
    Is it à rising rate? If not,that Is the possible problem, i run bbm stage 3 with a bosch adj fpr,and i dont lean up,first running the charger and now k26#8 turbo.still im running a cis fuel pump so that might be helping me,good luck mate!!!Roderick

  9. 07-03-2012 12:38 AM #9
    Im running the BBM adjustable Fuel Pressure reg. i'm going to change the fuel filter tomorrow and see whats up.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts