Price? Harness, cluster and ecu? Might be interested for my mk4. But kinda looking for a full swap. Pm me.
#1
Ok, let me start by saying please, don't waste my time. I ahve to drive 6 hours to get to this motor & nothing pisses me off more then driving that distance, sittign around all weekend waiting for someone and them not have the respect enough to even call me back.
Now onto the motor:
My car was totalled. Motor still turned over and ran fine, revved it up a little, nothing major just enough to clarify it worked. I didn't want to sell a motor unknowing if it ran. The motor was in an 01 Jetta. 104,xxx miles. I was the second owner of the car. Motor saw almost all highway miles. Alwyas changed oil 3k-5k miles, with Royal Purple 5w30 until 11 months ago when I came to PA and couldn't find that so I ran Pennzoil Ultimate Syn 5w30. Always got the highest grade oil filter.Always ran 93 octane fuel. I changed the plugs,4 times. Why? Becuase it doesn't hurt to do a little tune up occasionally, and it doesn't cause harm. Wires 3 times, one time it was because one wire was acting funny, (misfire). ALWAYS OEM from ECS tuning.
Maitence/Mods: All Maitence Performed by NGP/Fitzgerald's VW
Timing Chains/Guides
HeadGasket
Rear Main Seal
Valve Cover Gasket
Water-Pump
Aux. Water-Pump
Coolant (Crack) Pipe
Thermostat Housing
Green Top Coolant Sensor
Serp. Belt Tensioner
Serp Belt (2)
Crank Sensor
OEM MAF Sensor
OEM Injectors/Fuel Rail
TT 264/260 Cams
ECS Lightweight Pullies
NOW. Being a fair seller there was one mishap with the motor. Me and another gentlemen attempted to install the cams, an error was made. Motor jumped timing, bent 3 exhaust valves. HE supplied me a VR6 head off of his GTI being the gentleman he was, and it had less miles then mine. (Not Sure of exact number). The Head went to a small VW shop in Severna Park/MD. They've had a car or two in PVW. They replaced the ehadgasket, the head, headbolts, valve cover gasket, and crank sensor.
The motor's been out for 2 weeks now. wrapped in a tapr. on an engine hoist, resting on a wooden pallet, PM me for serious inquires, I'd like to unload Friday. Can supply recipts of all work done on the car, and have extra parts I'll include.
#2
Price? Harness, cluster and ecu? Might be interested for my mk4. But kinda looking for a full swap. Pm me.
#4
Price? Pm me. My brother is interested.![]()
aka vwtrash
i make stickers, shirts, etc- pm me.
#5
#11
price? it can't be that low because i don't see it sold lol
pics?
mk5 jetta 2.5 / 99.5-A4-SOLD / Contact me if your in PA and want PlastiDIP done /istagram me@gyro_mkV