Quick exhaust polish just to get the residue off... Before
After
Final Sun Shots
Another happy customer
Thank you for looking and Happy 4th of July!
#1
This was a detail from a local guy requesting exterior two-step polish with a interior clean up. This was a relatively quick detail, took about 8 hours total with a one day turn around time. Enjoy!
What was done:
- Before pictures
- Wheels hit with Sonax full effect and iron x
- Tires treated with Adams APC and prima nero
- Engine sprayed down and treated with in and out spray
- De-Bugged with 1Z Bug and Tar Remover
- Exterior wash using lusso auto bathe and foam gun w/ CG MSii
- Door, hood and trunk jambs cleaned
- Prima nero on undercarriage
- Aquartz Iron Cut to decontaminate
- Clayed entire exterior including windows
- Taped up
- 3 step - m105 -> menz sip -> opti poli-seal
- Rubber and vinyl cleaned w/ In and Out, Prima nero
- Exhaust tips polished w/ Optimum Metal Polish
- Windows clayed again and cleaned with prima clarity
- Wheels waxed with Prima Wheel Armour
- Exterior Wax -> 1Z Glanz Wax
Interior:
- Vacuum
- Trims treated with Prima Nero, Adams in and out and 1Z Cockpit Premium
- Interior glass cleaned with clarity
Products used:
Exterior wash:
- Lusso auto bathe
- Gilmour Foam gun w/ CG MaxiSuds
- Blue microfiber wash mitt
- Uber super drying microfiber towel
- Prima nero on undercarriage
- Aquartz Iron Cut
- 1Z Bug and Tar Remover
Engine:
- Adams APC
- Adams In n out spray
Interior:
- 1z Cockpit Premium
- In n out and Prima Clarity and Nero to clean the trims
Paint correction:
- Porter Cable PC 7424XP
- Flex 3401
- Flex PE-14
- Uber green and blue 4/5.5 pads
- Surbuf pads 5.5
- Megs 105
- Menz SIP
- Opti Poli-seal
- 1z Glanz Wax
Onto the pictures
Upon Arrival
Clay was pretty bad around the whole car
Menz SIP application
Engine Wipedown as the sealant cures
After
![]()
2008 ///M3 | 6MT
#2
Quick exhaust polish just to get the residue off... Before
After
Final Sun Shots
Another happy customer
Thank you for looking and Happy 4th of July!
2008 ///M3 | 6MT