G-lader G75 made in germany

[einser-rabbit]

hi ,,, G-lader G75 from germany roettele racing http://www.roettele-racing.de/index1.html
block carved out of the mass, 12 time machining aluminium


G75
http://www.roettele-racing.de/shop/t...e=1&referid=24

[petethepug]

Have been watching developments of this for some time. When are they going to break out some sound bytes, clips or pics of this thing in action?



It's at least 35% wider than stock. Without the pulley or timing belt set up it's hard to tell if only the center G-Lader bracket (middle of the block) would have to be altered. It seems like all the displacement increase comes from elongating the charger by about a third. If displacement did go from 60 to 75, that 25% increase is likely beefing up the case by 10%.


The G75 billet case doesn't have structural gussets. It's cool the current price of magnesium and the technology available with CNC is allowing the G-Lader to evolve.

[jeffs vw]

This looks awesome! I want one

[crazynorweegian]

Wow, you would have to have deep pockets and a real G60 fetish to justify that. Cut the price in half and they would fly off the shelf. That amount of money would probably put you in the ballpark of the new BBM charger. Personally, I would do the BBM one all day long since I could drive 60 minutes to get support... or I would just put in a 20v turbo.

[G0to60]

Wow, that's pretty impressive. I'd love to see some numbers of this bolted on a stock(ish) PG and on some other modified engines.

The price is a little but I'm still glad they're continuing with the G-ladder. There's still crazies out there.

[jeffs vw]

What is the price on one of these bad boys?

[G0to60]

What is the price on one of these bad boys?

2,900 € or about $3,700 I think. Pretty hefty price tag and I'm pretty sure that doesn't include shipping.

[jeffs vw]

Damn i will just stick to getting a BBM charger for that price!!!!!!!!!!!!! im sure the lysholm will still push more CFM's

[Tommy D]

Any pictures of the displacer, or of the final assembly? Their G-65 modification to a regular g60 is pretty impressive also.

[tklies]

I've been looking at this charger also. I would like to see some videos and also info. such as boost and HP gains.

[einser-rabbit]

G65 ,,http://www.youtube.com/watch?v=iH4R8qqisA8

G75 is still in prototype

[jeffs vw]

Lot cooler if they sold these for 2500

[Issam Abed]

Lot cooler if they sold these for 2500

This.
I can appreciate the engineering involved and the time but the machining cost & material is under $1000 USD assuming T6061 is being used here.

[petethepug]

Prob trying to get patent rights on it.

[Tosaden]

I got one of Tim's G60 Laders when the G65 was not yet available. They are nice, give you more power over stock and are ok to rev up to 15.500 rpm.

http://www.vwcorrado-forum.de/wbb/in...threadID=37600

Currently waiting for G75 myself. 2900 Euros is much but you can subtract the German 19% sales tax as shipments out of the EU are tax free.

2900/1.19=2437 and there you go.

Also, he said 2900 is not the final price. It may get a bit cheaper than that.

[Issam Abed]

Prob trying to get patent rights on it.

Can't patent a design that is 30 years old. He can patent the dimensions & how it physically looks but there are many loop holes around that and unless he has $30-$40G's sitting down for the patent office then he wont get as far as a patent in his home town.
Sucks but that is the reality of it....

if you make it affordable , someone will not waste the time to copy it.

[jeffs vw]

like i said they should sell these for 2000 to 2500 and i bet they would make a killing.
do these things mount on to the stock g60 brackets? seems like it would have aproblem with the Alt.