Username or Email Address
Do you already have an account?
Forgot your password?
  • Log in or Sign up

    VWVortex


    Page 1 of 2 12 LastLast
    Results 1 to 25 of 38

    Thread: Parting: 91 sedan ... 26155

    1. 07-15-2012 07:00 PM #1
      Moved over from fs thread...

      Got a truck and the wife says something has to go.

      It needs a good bit of work still. Pictures will explain.

      Engine:
      3a with 13k miles
      Rebuilt big valve head
      270 autotech cam
      Tt adjsustable cam gear
      Tt dual downpipe into custom 2.25 back ...sold
      E30 motor mounts...SOLD
      Poly trans mount...SOLD
      New clutch and resurfaced flywheel
      BMW battery cable... Relocates to trunk

      Was going with motorcycle carbs because I fried the ecu when I didn't have my grounds sorted.
      The manifold isn't built for the carbs but have the flange and pipe. They are cbr600 carbs.
      New intank pump from an evo 8. (put in before I decided to go carbs)
      I've heard motor run a handful of times, but it was on starting fluid.

      Suspension: SOLD
      Boge turbo gas all around
      G60 fk 60/40 springs
      Custom rear strut brace

      Wheels:
      Mb motoring 16's need refinished and tires

      Brakes:
      10.1's in front g54 calipers...SOLD
      Drums in rear, but do have spindles to convert to rear discs.
      Passenger side has new bearing ...SOLD

      Body:
      Custom Led taillights
      Brazil dual round headlights
      Treated rust spots with por15 (and spots prone to rusting)
      Sparco gas cap .
      Rare fox trunk lip spoiler...SOLD
      Mk2 front air dam
      Needs painted.

      Interior:
      Stripped
      Seats are from a Suzuki swift gti. Pretty deep bolsters, need brackets made.
      5 point harnesses
      New ignition switch from auto zone ...


      Random:
      Audi 5k single pass ic ... Fits nicely in behind grille
      G60 injectors

      Car was initially going to be my autocross car, just ran out of time, got married, and wife is on me pretty hard about getting rid of my project... Kills me to do it...

      My zip is 26155

      Last edited by littlesnides; 08-05-2012 at 10:06 PM.

    2. 07-15-2012 07:05 PM #2
      Spoiler is sold

    3. 07-16-2012 07:24 PM #3
      Suspension and exhaust pending

    4. Member
      Join Date
      Aug 17th, 2011
      Location
      Cold Spring, NY
      Posts
      2,518
      Vehicles
      '89 Fox Coupe, '04 Jetta GLS Wagon TDi, '88 Fox GL Wagon (project)
      07-16-2012 09:12 PM #4
      Interested in the steelies. Can you send me some pics?
      How a VW Fox Wagon sucked me back in...a build thread

    5. 07-16-2012 09:58 PM #5
      Steelies... Still gold... Tires shot...


    6. Member woteg's Avatar
      Join Date
      Apr 7th, 2009
      Location
      nubraska
      Posts
      781
      Vehicles
      06 a3; 05 gli; 93 fox
      07-16-2012 10:00 PM #6
      exhaust shipped to 68516?
      Quote Originally Posted by Hawaii5-0
      never let a woman touch your car, it should have never been in the kitchen for her to touch

    7. 07-17-2012 12:29 AM #7
      Is the cam for solid lifter or hydraulic? and do you know if the suspension from your 91 will work on a 90 fox?

    8. Member
      Join Date
      Aug 17th, 2011
      Location
      Cold Spring, NY
      Posts
      2,518
      Vehicles
      '89 Fox Coupe, '04 Jetta GLS Wagon TDi, '88 Fox GL Wagon (project)
      07-17-2012 09:22 AM #8
      Gold, huh? Well - they will end up getting painted - but if they are in good shape I'm interested - I don't need tires.
      How a VW Fox Wagon sucked me back in...a build thread

    9. 07-18-2012 04:45 PM #9
      Yeah, surprisingly I got quite a few compliments on that gold setup...

      The paint is pretty cracked up... I dunno if I want to ship the big stuff, it's a pain

    10. 07-18-2012 04:47 PM #10
      Exhaust and suspension are pending... Cam is for hydraulic lifter head

    11. 07-20-2012 11:02 PM #11
      Suspension and exhaust have been paid for

      Still lots of good things on this car...

      Have taillights still....and fuel injection stuff minus the ecu


      Can't believ these headlights haven't sold.... I waited two months on them from brazil!
      Last edited by littlesnides; 07-20-2012 at 11:08 PM.

    12. 07-25-2012 07:05 PM #12
      was tearing apart and remembered i had new control arm bushings installed and a new windshield ...

    13. Member denver_fox's Avatar
      Join Date
      Oct 15th, 2011
      Location
      Denver, Colorado
      Posts
      563
      Vehicles
      93 SLC---93 2dr---88 wagon---79 Jimmy
      07-26-2012 09:25 PM #13
      Bump for a great seller! Received the spoiler and it's pretty sweet. Cant decide if Im gonna paint it yet.

    14. 07-27-2012 06:53 AM #14
      Glad to hear you like it!

    15. 07-28-2012 10:42 PM #15
      Hrrrmmm forgot new cv axles too

      Why did I decide to part this car again?

    16. 08-06-2012 06:48 AM #16
      Speak up if you are interested in any body panels...stuff is goin to the crusher soon

    17. Member
      Join Date
      Jun 9th, 2010
      Location
      Philly
      Posts
      190
      Vehicles
      '89 Fox GL
      08-06-2012 12:56 PM #17
      Picked up a bunch of parts from littlesnides yesterday. Parts were great, had them pulled when I got there. He has some cool stuff still and the price is right people. Great seller, highly recommend!


    18. 08-07-2012 04:53 PM #19
      4spd or 5? im looking for some 4spd linkage parts

    19. 08-10-2012 07:10 AM #20
      Nope 5 speed... Want a cheap 5 speed swap?

    20. Member kerensky's Avatar
      Join Date
      Mar 5th, 2001
      Location
      Norman, OK
      Posts
      4,935
      Vehicles
      '89 Fox GLS, '89 Fox wagon, '73 914, '72 'vert.
      08-11-2012 01:10 AM #21
      Damn, I'd love to take that motor, but West Va might as well be on the moon. Maybe when the Sooners come to Morgantown in November they could toss it in the bus's luggage compartment on the trip back! :lol:

    21. 08-11-2012 02:05 PM #22
      Yeah... You'd pay more in shipping than I would charge for the engine

    22. 08-12-2012 05:43 PM #23
      Anything else? I remember tach clusters used to be an upgrade to the clock... Also have a catch can... Engine and trans are out

    23. Member kerensky's Avatar
      Join Date
      Mar 5th, 2001
      Location
      Norman, OK
      Posts
      4,935
      Vehicles
      '89 Fox GLS, '89 Fox wagon, '73 914, '72 'vert.
      08-13-2012 12:42 AM #24
      Quote Originally Posted by littlesnides View Post
      Yeah... You'd pay more in shipping than I would charge for the engine
      Funny. There's an older gent at my church that delivers cars as his 'retirement' job. He's actually in WV tomorrow. I didn't get a chance to ask him, but maybe I could get him to bring it back next time he's out in that direction.

      Soooo, how much for the mill?

    24. 08-15-2012 02:56 PM #25
      300 with trans
      200 without

    Page 1 of 2 12 LastLast

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •