Spoiler is sold
Moved over from fs thread...
Got a truck and the wife says something has to go.
It needs a good bit of work still. Pictures will explain.
3a with 13k miles
Rebuilt big valve head
270 autotech cam
Tt adjsustable cam gear
Tt dual downpipe into custom 2.25 back ...sold
E30 motor mounts...SOLD
Poly trans mount...SOLD
New clutch and resurfaced flywheel
BMW battery cable... Relocates to trunk
Was going with motorcycle carbs because I fried the ecu when I didn't have my grounds sorted.
The manifold isn't built for the carbs but have the flange and pipe. They are cbr600 carbs.
New intank pump from an evo 8. (put in before I decided to go carbs)
I've heard motor run a handful of times, but it was on starting fluid.
Boge turbo gas all around
G60 fk 60/40 springs
Custom rear strut brace
Mb motoring 16's need refinished and tires
10.1's in front g54 calipers...SOLD
Drums in rear, but do have spindles to convert to rear discs.
Passenger side has new bearing ...SOLD
Custom Led taillights
Brazil dual round headlights
Treated rust spots with por15 (and spots prone to rusting)
Sparco gas cap .
Rare fox trunk lip spoiler...SOLD
Mk2 front air dam
Seats are from a Suzuki swift gti. Pretty deep bolsters, need brackets made.
5 point harnesses
New ignition switch from auto zone ...
Audi 5k single pass ic ... Fits nicely in behind grille
Car was initially going to be my autocross car, just ran out of time, got married, and wife is on me pretty hard about getting rid of my project... Kills me to do it...
My zip is 26155
Last edited by littlesnides; 08-05-2012 at 10:06 PM.
Suspension and exhaust have been paid for
Still lots of good things on this car...
Have taillights still....and fuel injection stuff minus the ecu
Can't believ these headlights haven't sold.... I waited two months on them from brazil!
Last edited by littlesnides; 07-20-2012 at 11:08 PM.
I realize that I have told a couple people on here I would get them shipping quotes. I apologize that it hasn't been as quick as you or I would like it to be. I am just getting back into the swing of school (I teach) so once I'm past these first few hectic weeks I can yank those parts and take them to the post office. Once again sorry for my tardiness
C'mon peeps junkyard prices here
All door handles - 20 plus shipping
Tach cluster- 20 plus shipping
Dome/map light - 10 plus shipping
Subrame with new control arm bushings - 45 picked up
Windshield - 50 you pull!! (I will help)
Seats - 60 for the pair picked up
Door panels - free! (picked up)
Headlights would be perfect for retrofitting hid!
Let's get it off my lawn!
My trunk in the coupe has started leaking, and as a result water got on the driver side bulb holder and fried it. Tail light has a broken screw insert as well.
SO, driver side tail light lense and bulb holder?
And, are all the clips on that dome light still attached?
I will try and get the proportioning valves off soon... care if I just cut the lines? unless someone wants lines...
yep 20 for all handles aka 5 dolla a handle
sorry but the taillights and bulb holders are gone ...you may be able to bug insanebuslady for them... he was going to attempt to put the newer style tails on his older fox
paypal is firstname.lastname@example.org
headlight buckets are different for the lights.... I think I still have the original headlights and buckets still though
pretty sure the tabs are still intact on my dome light ...will double check this weekend
Last edited by littlesnides; 08-24-2012 at 10:53 AM.