Have them, Love them!
Big Brake Kit (2pc) - MK4 FRONT 99 - 04
Product Code: 2187-K $1750.00
Above BBK with rear pads, lines & 256x22 One-Piece rotor $2100.00
Big Brake Kit (2pc) - MK5/MK6 05-11
Product Code: 2190-K $1750.00
- Weight of each 330x30 Two-Piece rotor: 10.66 lbs.
- Weight of caliper, aluminum adapter and line is: 3.86 lbs
- Retail Price: $1,895.29
This kit comes with the following:
(2) 4-piston aluminum calipers (RB4045) Available in Red or Black
(2) Two-piece TRUE center-mount rotors - Size: 330x30mm (13" x 1.2") Available in Open Slot or Drilled and Slotted.
(2) Aluminum adapters 7075-T6 Alloyed aluminum
(1) Set of custom built front stainless steel brake lines (banjo fitting) is required to install this kit
(1) Set of RB brake pads: ET300 (PD1149-33) (Included in price)
Mid-Summer Sale! :
Shipping to US included (ex AK & HI)
Tax is required for CA residents.
- Caliper Body: Made of forged 6061-T6. Light weight at only 4.5lbs, these new RB4000 calipers are re-designed and built for the toughest brake jobs with extended service life before any rebuild is required.
- Low Profile: Together with RB Center-Mount design two-piece rotors, you hardly even need to require a spacer to install the kit.
Pistons: Caliper pistons are 38mm diameter and made of stainless steel instead of aluminum commonly used by other caliper mfgrs which can substantially reduce the heat transfer (approx 1/10 of aluminum) from the pad to brake fluid. Pistons are vented to further reduce the heat contact area and improve air circulation thereby reducing more heat transfer.
- Dust Seal: Our dust seal is of built-in type (instead of external boot type) uniquely designed to shield the dust and foreign material from contamination and will not rip - as commonly seen on boot type dust seals.
- Hardware: Brake pad pins and banjo connections were re-designed for easier brake line connection and brake pad replacement.
- Surface Coating: Powder coating with most durable finish for lasting appeal.
- Hardware: Most hardware is made of stainless steel for durable performance and appearance.
- Never Get Lost Bleeder Cap: Newly designed with a retaining loop so you will never have to find it again and/replace the lost ones. (made of durable EPDM)
- Use standard FMSI brake pads (D647): A very common P/N (same as WRX 4-pot fix pistons calipers, plenty of choice for suppliers and compounds.
- Pre-loaded Brake Pads: Brake pads are shipped pre-loaded to caliper for your installation convenience.
- Caliper Color: Choose your caliper color - Available in Red or Black.
- Made in USA: Calipers are designed, fully assembled and hydro-tested in our Fullerton, CA facility, with full after sales support/service.
Two-piece Rotor Assembly
Distributors for FFE Racing, GoAPR, CTSturbo, Integrated Engineering and HPA
Innovative Motorsports + UM
If i can buy, just the Calipers and carrier/ adapter send me your paypal today hahahaha