Username or Email Address
Do you already have an account?
Forgot your password?
  • Log in or Sign up

    VWVortex


    Results 1 to 13 of 13

    Thread: Parting: Complete '90 Passat Wagon

    1. Member swingwing205's Avatar
      Join Date
      Jun 13th, 2001
      Location
      Knoxville, TN
      Posts
      3,056
      07-24-2012 03:17 PM #1
      Right now everything is here. the car is automatic with a 34K mile auto tranny, car is white in color. No rust anywhere. All the interior plastics are good and even has a factory rear cargo cover It's a shame to part this, but I am and life is going to go on.

      All parts (other than the tranny and motor) are $75 or you can make a reasonable offer, and if the offer is good enough it's yours. Lowball offers won't get a response. This will not be around much longer I promise. Inquire about whatever you want/need, and please do so fast.

      Per the rules ( I need t post up at least one part w/ a price):

      2.0 16v motor, ran good until the fuel system screwed up, with brand new ignition components (cap, rotor, Beru wires), and a brand new oil pump, and extra newer knock sensors. $250

    2. Member
      Join Date
      Nov 27th, 2004
      Location
      18704
      Posts
      5,643
      Vehicles
      1991 b3v 1981 jetta
      07-24-2012 06:09 PM #2
      Where are you located? What color interior?

    3. Member swingwing205's Avatar
      Join Date
      Jun 13th, 2001
      Location
      Knoxville, TN
      Posts
      3,056
      07-25-2012 12:02 AM #3
      Knoxville, TN. Grey interior

    4. Member Seamus68's Avatar
      Join Date
      Apr 4th, 2005
      Location
      PottsVegas, PA
      Posts
      3,426
      Vehicles
      84 ABA Jetta, 97 Golf, 84 rabbit 16v, 97 Cherokee
      07-25-2012 11:18 AM #4
      Quote Originally Posted by swingwing205 View Post
      Knoxville, TN. Grey interior
      How is the condition of the intake rubbers? also how much for them?

    5. Member sin bar's Avatar
      Join Date
      Jan 12th, 2008
      Location
      sin bar ga
      Posts
      18,683
      Vehicles
      wagoon.
      07-25-2012 06:08 PM #5
      any chance i can get the inner door handle and it's bucket for the drivers side door? specific, i know, but im gettin' desperate here.

    6. Member swingwing205's Avatar
      Join Date
      Jun 13th, 2001
      Location
      Knoxville, TN
      Posts
      3,056
      07-25-2012 07:50 PM #6
      Quote Originally Posted by Seamus68 View Post
      How is the condition of the intake rubbers? also how much for them?
      Intake rubbers, what do you mean, the intake boot at the fuel distributor and elbow at the manifold? If so, I'll have to check them out and see the shape they're in, but I'd say they're probably excellent, but I'll check carefully. And, how much are you offering for them?

    7. Member swingwing205's Avatar
      Join Date
      Jun 13th, 2001
      Location
      Knoxville, TN
      Posts
      3,056
      07-25-2012 07:53 PM #7
      Quote Originally Posted by sin bar View Post
      any chance i can get the inner door handle and it's bucket for the drivers side door? specific, i know, but im gettin' desperate here.
      Sure, I can sell you those parts, but I don't know how much work (and it sounds like a lot because I know that means removing the door card to get to them) it'll be. But, let's start out with how much you're offering for it, and I'll check out what it looks like it's going to take work-wise to remove those parts.

    8. Member sin bar's Avatar
      Join Date
      Jan 12th, 2008
      Location
      sin bar ga
      Posts
      18,683
      Vehicles
      wagoon.
      07-26-2012 12:06 PM #8
      Quote Originally Posted by swingwing205 View Post
      Sure, I can sell you those parts, but I don't know how much work (and it sounds like a lot because I know that means removing the door card to get to them) it'll be. But, let's start out with how much you're offering for it, and I'll check out what it looks like it's going to take work-wise to remove those parts.
      removing the door cards is about a 10-15 minute process if you've done it before. my first time took me about 20 minutes. the cup and handle itself, i dunno, $15-20 + shipping? if you're parting the whole thing, you'll be taking these things off anyhow, right? ha, anyway, let me know what you think!

    9. Member swingwing205's Avatar
      Join Date
      Jun 13th, 2001
      Location
      Knoxville, TN
      Posts
      3,056
      07-27-2012 03:56 PM #9
      Quote Originally Posted by sin bar View Post
      removing the door cards is about a 10-15 minute process if you've done it before. my first time took me about 20 minutes. the cup and handle itself, i dunno, $15-20 + shipping? if you're parting the whole thing, you'll be taking these things off anyhow, right? ha, anyway, let me know what you think!
      Dude, I haven't forgotten you, just had no chance to look yet. Give me a day or 2....

    10. Member UrSeRiOuS's Avatar
      Join Date
      Mar 19th, 2005
      Location
      Wilkes Barre, PA
      Posts
      3,691
      Vehicles
      1992 Corrado SLC VRT, 1999 Jetta (MKIII) turbo 2.slo
      07-29-2012 03:26 AM #10
      pm sent

    11. Member swingwing205's Avatar
      Join Date
      Jun 13th, 2001
      Location
      Knoxville, TN
      Posts
      3,056
      08-01-2012 04:22 PM #11
      ttt

    12. Member swingwing205's Avatar
      Join Date
      Jun 13th, 2001
      Location
      Knoxville, TN
      Posts
      3,056
      08-03-2012 04:32 PM #12
      ttt

    13. Member swingwing205's Avatar
      Join Date
      Jun 13th, 2001
      Location
      Knoxville, TN
      Posts
      3,056
      08-07-2012 05:18 PM #13
      To those with special request/me removing parts: Still working on it, and will know something tomorrow evening.

      Also have a set of WeatherTech front window vents on this Passat if anyone is interested.

      Otherwise, TTT

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •