Bump!
-Matt
+ Reply to Thread
Results 1 to 35 of 46
-
Member
- Join Date
- Mar 22nd, 2004
- Posts
- 1,059
1.8T Transverse BT/Internal parts for sale! Local pickup only! *SOLD*
07-25-2012 06:56 PM
#1
SOLD! to sponcar!
Hello all! well, it's certainly been a long time since I found myself on the tex. Haven't had my GTI in over a year and a half now, but I still have a bunch of BT/Internal parts that I was going to use on it so I figure I might as well unload these to someone who could use em!
So to jump right into it, I figured I'd link all the pics, then give the list of items included, details, and what items would still be needed to complete the kit!
Alright! Now, onto a list of items from all the pics in order from top to bottom:
-Stock AWP Intake manifold painted black (cosmetics only).
-Engine Mount.
-Timing Belt Kit.
-NewSouth Column Pod w/ Digital Boost Gauge.
-Bearings.
-More Bearings.
-Cylinder Head Bolts.
-Thermostat (o-ring is included, wasn't in the pic).
-4x Ignition Coils.
-Replacement Inside/Outside LED bulbs.
-Water Pump.
-4x AEB Pistons w/Rings and Pins.
-4x Brute Connection Rods.
-Modified Stock Intake Box for Turbo Kit.
-Intake Tubing from Box down to the Turbo.
-Misc Oil Catch Can.
-Oil Feed/Return Lines for Turbo.
-External Wastegate.
-Transmission Mount.
-Wire Harness.
-Coated Head Top (Cosmetic).
-Ignition Coil Overlay (Cosmetic).
-Headgasket Set.
-Piping for Oil Catch Can/Turbo Kit.
-BT Downpipe (more info below).
-Exhaust Manifold (more info below).
-T3/T4 50 Trim, .64 AR Housing (more info below, and my cat tried to photo bomb me on one of those! lol).
-Paperwork from Original Engine Build Order.
So to begin, every single part I've included here is new, as in it's never been installed on a car, or even really set foot outside of my garage in over 2 years lol.
Alright, so more info on everything! First off, the BT kit is a full VBanded kit from Pag Parts (Here's the link to the kit on their website: http://pagparts.com/product_info.php...roducts_id=583. The kit itself is a T3/T4 50 trim with a .64AR housing. I'd also like to point out that although the kit is externally gated, you can see that I had the downpipe modified before shipment to have the wastegate discharge back into the main pipe instead of releasing to atmosphere. Something I'd like to point out is the rust on the exhaust manifold. This sadly came about due to a huge mistake on my part by placing these parts in a storage area that had moisture trapped in it and terrible air circulation. Never the less, you can tell by the further photos that the manifold was never installed or used despite the rust that has accumulated on it.
Those are all the details I can think of off the top of my head. On the flip side, a few things that this kit does not include that you would absolutely need are:
-Fueling parts, including injectors and likely an upgraded fuel pump.
-Software, be it one of the major brands that do BT tuning or standalone if you're up to the challenge.
-An intercooler setup that retains the stock routing for piping. You can see in the picture noted on the PagParts website that the turbo does NOT face up towards the hood of the car. I am not sure if you would be able to reclock the housing and use over-the-top piping.
I'd like to point out that although I was well on my way towards obtaining all the parts for an engine rebuild, I am not 100% sure that everything included will be all the items necessary to complete it. I would suggest anticipating having to purchase misc parts to fully complete any build. Obviously all parts are sold as is, but I can guarantee you that the pictures above reflect the condition that everything is in. These pictures were taken on 7/25/2012.
On to the price! I'm asking for $1,800 for everything mentioned. At the moment I'm not really interested in parting the set out, but in the future if that changes I will be sure to make note of it here. I'm looking for someone local to the Los Angeles area who is interested in a pick up or meet up. Definitely not looking to ship all of this stuff due to the weight and size of all the misc parts. If you have any questions feel free to PM me on here, respond in this thread, or e-mail/text/call me at the number provided. Thanks for having a look! Have a good one!
-Matt
E-mail: Matt.Buhen@gmail.com
Phone: (818) 568-9073
*Note: Going to be out of town from August 13th to August 18th, Won't have the best cell reception so I might not respond to calls/texts. I'll try to log onto the tex as much as possible to check messages and/or posts in the thread.
Last edited by QuakeFreak121; 08-20-2012 at 07:24 PM.
-
Member
- Join Date
- Mar 22nd, 2004
- Posts
- 1,059
-
Member
- Join Date
- Jan 4th, 2012
- Location
- So cal
- Posts
- 162
- Vehicles
- 03 jetta
07-26-2012 06:31 AM
#3
Let me know if you decide to part it out. I can really use the timing belt kit.
-
Member
- Join Date
- Mar 22nd, 2004
- Posts
- 1,059
-
Member
- Join Date
- Mar 9th, 2009
- Location
- SoCal
- Posts
- 348
- Vehicles
- 05 Golf 2.0, 04 Jetta 2.0
-
Member
- Join Date
- Jan 19th, 2006
- Location
- LA, OC
- Posts
- 2,258
- Vehicles
- 01 wolfsburg 24V swapped 08 F250 6.4
07-26-2012 03:25 PM
#6
if i didnt opt for a vr swap, i would be all over this! bump for you buddy!
Clutch, Cams, Engine Tuning, Coilovers etc. Call (714)997-5842
www.FourSeasonTuning.com
-
Member
- Join Date
- Mar 22nd, 2004
- Posts
- 1,059
07-26-2012 03:59 PM
#7
ATM I'd like to keep them as part of everything just as an extra little mod for anyone who's planning on doing a serious tear down and rebuild/turbo upgrade. I'll let you know if that changes though!
Originally Posted by OverCaffeinated
Do I have to buy everything if I just want you LED bulbs?
Thanks! VR swap sounds fun! Originally Posted by crazymoforz
-Matt
-
Member
- Join Date
- Mar 22nd, 2004
- Posts
- 1,059
-
Member
- Join Date
- Mar 22nd, 2004
- Posts
- 1,059
-
Member
- Join Date
- Mar 22nd, 2004
- Posts
- 1,059
-
Member
- Join Date
- Mar 22nd, 2004
- Posts
- 1,059
-
Member
- Join Date
- Mar 22nd, 2004
- Posts
- 1,059
-
Member
- Join Date
- Mar 22nd, 2004
- Posts
- 1,059
-
Member
- Join Date
- Mar 22nd, 2004
- Posts
- 1,059
-
Member
- Join Date
- Aug 21st, 2005
- Location
- Point Mugu
- Posts
- 825
- Vehicles
- 1992 Corrado ATC 20V 1.8T, 2012 Durango R/T
08-01-2012 04:00 PM
#15
let me know about rods and pistons?
My 1.8T Corrado Swap
http://forums.vwvortex.com/showthrea...-VR6-t-to-1.8T
-
Member
- Join Date
- Mar 22nd, 2004
- Posts
- 1,059
08-01-2012 06:01 PM
#16
Will do! Not gonna part it out yet, figured I'd give it some time. I'd really like to move all the parts at the same time. Originally Posted by dri0514
let me know about rods and pistons?
And bump!
-Matt
-
Member
- Join Date
- Mar 22nd, 2004
- Posts
- 1,059
-
Member
- Join Date
- Mar 22nd, 2004
- Posts
- 1,059
-
Member
- Join Date
- Mar 22nd, 2004
- Posts
- 1,059
-
Member
- Join Date
- Mar 22nd, 2004
- Posts
- 1,059
-
Member
- Join Date
- Mar 22nd, 2004
- Posts
- 1,059
-
Member
- Join Date
- Mar 22nd, 2004
- Posts
- 1,059
-
Member
- Join Date
- Feb 5th, 2010
- Location
- ¯\(º_o)/¯
- Posts
- 1,280
- Vehicles
- 01 VW Jetta wolfb
08-04-2012 08:19 PM
#23
Only if this would come 3months ago when one of my piston rings was blown, I would totally bought this. but let me know if you part it out. Im interested in turbo kit + gauge pod
-God created turbo lag to give the v8's a brief moment of hope-
#workingclass society
-
Member
- Join Date
- Mar 22nd, 2004
- Posts
- 1,059
-
Member
- Join Date
- Mar 22nd, 2004
- Posts
- 1,059
-
Member
- Join Date
- Mar 22nd, 2004
- Posts
- 1,059
-
Member
- Join Date
- Mar 22nd, 2004
- Posts
- 1,059
-
Member
- Join Date
- Mar 22nd, 2004
- Posts
- 1,059
08-07-2012 03:04 AM
#28
Bump, Price reduced to $1,800 for everything. Will be changed in the original post as well. Looking to get these into the hands of a serious tuner, hit me up!
-Matt
-
Member
- Join Date
- Mar 22nd, 2004
- Posts
- 1,059
-
Member
- Join Date
- Mar 22nd, 2004
- Posts
- 1,059
-
Member
- Join Date
- Mar 22nd, 2004
- Posts
- 1,059
-
Member
- Join Date
- Mar 22nd, 2004
- Posts
- 1,059
-
Member
- Join Date
- Mar 22nd, 2004
- Posts
- 1,059
-
Member
- Join Date
- Mar 22nd, 2004
- Posts
- 1,059
-
Member
- Join Date
- Mar 22nd, 2004
- Posts
- 1,059
08-11-2012 03:41 PM
#35
Bump!
Also a note, I'm going to be out of town from August 13th to August 18th. I will still check the forum as much as possible but I will likely not have very good reception for text messages or phone calls during that time.
-Matt
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
For advertising information click HERE
