First working 3D-printed firearm built

[WhitePoloCT]

source: http://www.gizmag.com/first-3d-printed-firearm/23473/

As the technology improves, 3D printers are being used more and more to create a wide variety of objects, some incredibly useful (like skeletal implants) and some just for fun (like custom robot figurines). Here's another - somewhat controversial - example of just how ubiquitous this technology could become: a working gun built using an AR-15 rifle part made with a 3D printer.


The gun maker first printed the design with ABS plastic and used a conversion kit to assemble a .22 pistol


To test the 3D-printed part further, a metal AR-15 upper receiver was attached and fired a few shots with a higher-caliber .223


The existing design was intended to be made out of solid metal, so the gun maker altered it a bit by strengthening some of the lug holes and adding a trigger guard

The gun maker, going by the name "HaveBlue," constructed the AR-15's lower receiver - which holds many of the gun's main components, including the trigger assembly and magazine well - using a modified design from a gunsmithing website and an older model Stratasys 3D printer. Since the existing design he started with was intended to be made out of solid metal, HaveBlue altered it a bit by strengthening some of the lug holes and adding a trigger guard. He then printed the design with ABS plastic and used a conversion kit to assemble a .22 pistol.
The gun maker first printed the design with ABS plastic and used a conversion kit to assemble a .22 pistol

Amidst protests from an AR-15 discussion board that the part would fail and seriously injure him, he successfully fired 200 rounds using the 3D printed lower receiver without any trouble. To test it further, a metal AR-15 upper receiver was attached and a few shots fired with a higher-caliber .223. So far, the part seems to be holding up well and hasn't shown any major signs of wear.

This certainly isn't the first 3D printed gun part in existence, but it could be the first that's been made into a fully working firearm. What's important to note is that under U.S. law the lower receiver of an AR-15 (or any similar gun for that matter) is the component that is legally considered the "firearm." It's the main part that allows the gun to function, and even has the serial number printed on it for identification. Luckily for HaveBlue, making guns yourself isn't illegal so long as you don't sell or distribute them.

Still, with 3D printers becoming more popular and aimed at home use, a person being able to print their own parts for a working gun - particularly the one component that cannot be ordered through the mail - raises a number of issues. As amazing as it is that a 3D-printed gun could withstand firing a bullet, the potential for someone to build an unmarked firearm much more easily means we could see some pertinent new laws enacted in the next few years.

[personman]

I wish 3D printers were cheap enough to make this practical.

[Power5]

Wow, dude couldn't wait just a little longer to go public? Great time to show the media that the "gun" part can be made at home.

[gtguard]

Best comment on slashdot was something along the lines of "don't ban guns, instead we need to ban geometry in schools"

[dubraycer36]

Printed?
I don't understand.
Couldn't that be milled in a CNC machine, like they make wheels with?

[DIAF]

Printed?
I don't understand.
Couldn't that be milled in a CNC machine, like they make wheels with?

It could be, but most people don't have the coin for a CNC machine

3d printers on the other hand are becoming very available.

http://www.kickstarter.com/projects/...rst-3d-printer