F/S - Parting Out Euro R32-spec MKV GTI: Brakes, wheels, tail lights, interior, etc. (S. Florida)

[nitrovalentine]

Hi all,

***CAR IS GOING THIS WEEK! FINAL CHANCE TO GRAB THIS STUFF!***
I am parting out my Reflex Silver MKV GTI that has a decent amount of MKV R32 OEM(+) parts on it. I am located in South Florida.

Parts for sale include:
--Full R32 front & rear brake set, including calipurs, rotors, and pads (pads and rotors were both just replaced with BRAND NEW OEM ones 1 month ago); **REDUCED asking ONLY $500** + stock trade OBO for FULL KITS

--R32 OEM wheels powder-coated gloss black (some minor curbage on 2 wheels); asking **REDUCED $500** + trade OBO

--R32 interior micro-machined aluminum panels (the strips that inlay in the door, the cubby under the A/C, and above the glove box); asking $100 + stock trade

--EURO R32 tail lights (Hella OEM), perfect condition; purchased 2 years ago for $700, **REDUCED asking $300**, no trade needed

--ABD (true cold air, all the way down) intake, recently powder-coated metallic silver with new red couplers, does have a small dent in it but doesn't affect performance at all; **$150** + stock trade OBO (was $450 new)

--H&R rear sway bar (not sure exact diameter, I think it's 28mm solid-99% sure), but it is awesome whatever it is **$100**

I also have the full R32 leather interior, including front seats and rear bench, which are in good condition. Asking **$600 + GOOD CONDITION TRADE**

Please email me for photos, to make an offer, or with any questions: nitrovalentine@gmail.com.

Thanks!

-Heather

Here are pics of the actual switch and the micro-machined interior:

[mfbmike]

Also in SFL. Interested in the dash tray. However, for 50 bucks I can get a brand new one off ECS.

http://www.ecstuning.com/Volkswagen-...h_Tray/ES6365/

Do you still have the rubber insert for it? I'll trade you my stock + 20 bucks for it if you're interested.

I'm in Miami and I'm free the next two days if you want to meet up.

[nitrovalentine]

Also in SFL. Interested in the dash tray. However, for 50 bucks I can get a brand new one off ECS.

http://www.ecstuning.com/Volkswagen-...h_Tray/ES6365/

Do you still have the rubber insert for it? I'll trade you my stock + 20 bucks for it if you're interested.

I'm in Miami and I'm free the next two days if you want to meet up.

Hey, Mike. Are you referring to the rubber liner at the bottom? If so, yes, I have that. I can do stock + $30 if you're willing to meet up in Broward County and swap it out. Email me if you want to arrange a meet.

[mfbmike]

Hey, Mike. Are you referring to the rubber liner at the bottom? If so, yes, I have that. I can do stock + $30 if you're willing to meet up in Broward County and swap it out. Email me if you want to arrange a meet.

Stock + 20 bucks and I'll drive up to broward.

What part of Broward?

[nitrovalentine]

Stock + 20 bucks and I'll drive up to broward.

What part of Broward?

Pompano Beach. If you're looking to buy something else as well I'll give it to you for $20, otherwise for just 20-30 bucks it's really not worth my time, unfortunately. It's not really on my priority list to sell, but it is a good opportunity for you to get the part you want for half price since you won't have to pay ECS's absurd shipping cost. Let me know.

[mfbmike]

Pompano Beach. If you're looking to buy something else as well I'll give it to you for $20, otherwise for just 20-30 bucks it's really not worth my time, unfortunately. It's not really on my priority list to sell, but it is a good opportunity for you to get the part you want for half price since you won't have to pay ECS's absurd shipping cost. Let me know.

I PM'd you my number. I guess that leaves us at a stalemate then. There isn't anything else on your list I particularly need or want and the dash tray isn't particularly high on my list of mods I want to do to the R at the moment. As you say, for me to only save 20-30 bucks (while trading away a stock part) makes it even less so worth my time and gas . However, I did think it would be a cool little trip up to see the work you've done to your car and meet another enthusiast.

Good luck with the part out Heather.

[1082_R32]

how much shipped for the switch to 43065

[RexKiller]

Rear bumper in tact? How much if it is?

Might be interested in the interior front seats and bench pics?

[nitrovalentine]

Rear bumper in tact? How much if it is?

Might be interested in the interior front seats and bench pics?

I do not have an R bumper, I have a GTI w/ Votex rear bumper.

I do not have pics of the seats right now, but I have a lot of interest for them locally for $600 + Interlagos trade. Can't ship the seats.

[SFCL]

Do you have any pics of the tail lights?

[nitrovalentine]

Do you have any pics of the tail lights?

Yes, but they are very similar to the ones on the ECS Tuning site. Non-LED

[jbags18]

will the sway bar fit an r32? cuz i know an r32 sway bar won't fit a gti

[bokiNY]

How much for the brakes shipped to 10463?

[bldnit3]

You willing to ship?
If so pics of wheels?
Tires or no tires?

[nitrovalentine]

Not looking to ship anything but the tail lights, sorry fellas.

[nitrovalentine]

Items still available:

WHEELS $500 OBO w/ clean trade (LOCAL ONLY, not shipping)
INTERIOR TRIM $100 w/ trade
INTAKE $150 plus stock air box trade

EURO R32 TAILS $275 SHIPPED, no trade needed

Please EMAIL ME at nitrovalentine@gmail.com if you want anything. Car is GONE FOR GOOD this Sunday.

[izwhatitis9]

in need of a steering wheel...got anything?

[610]

parting out any bodywork?