How many times have I told you.... Bring it to ME!!!!! 30TH and Sandy Blvd Les Schwab in Portland.. I WILL TREAT YOU RIGHT!!!!! This is Rob, by the way.....
+ Reply to Thread
Results 1 to 22 of 22
Thread: PDX area allignment question
-
Member
- Join Date
- Oct 21st, 2005
- Location
- Vancouver, Wa
- Posts
- 1,154
- Vehicles
- 1993 Audi S4
PDX area allignment question
07-31-2012 08:47 PM
#1
Looking for a good allignment shop that wont try to rape you cause you have camber plates..
-
-
Member
- Join Date
- Oct 10th, 2006
- Location
- Tualatin, OR
- Posts
- 592
- Vehicles
- 88 Jetta coupe 16vt quattro/ 99 dodge ram 2500 4x4/ 2003 Harley Dyna low
07-31-2012 09:26 PM
#2
"Just because no one has done it, doesn't mean it can't be done."
"If you can't buy it, build it.. If it can't be built, maybe you really don't need it!!"
-
Member
- Join Date
- Oct 21st, 2005
- Location
- Vancouver, Wa
- Posts
- 1,154
- Vehicles
- 1993 Audi S4
07-31-2012 10:45 PM
#3
Hey Rob..I thought you left and went to the FAB SHOP??
Originally Posted by rjc69
-
Member
- Join Date
- Oct 10th, 2006
- Location
- Tualatin, OR
- Posts
- 592
- Vehicles
- 88 Jetta coupe 16vt quattro/ 99 dodge ram 2500 4x4/ 2003 Harley Dyna low
07-31-2012 11:21 PM
#4
When you catch the owner Comoros 2 counts of insurance fraud, and suspect him of tax evasion, It's time to leave. Went back to Schwab two years ago..... I will not go to jail because of some other idiot...
.
"Just because no one has done it, doesn't mean it can't be done."
"If you can't buy it, build it.. If it can't be built, maybe you really don't need it!!"
-
Senior Member
- Join Date
- May 4th, 2004
- Location
- Beaverton, OR
- Posts
- 20,559
- Vehicles
- 89 GTI 90 Audi Coupe Quattro 06 Xterra
08-01-2012 12:53 AM
#5
Trackside Motorsport off interstate does them I believe. My coworker is good friends with the owner. I've done a couple side projects for him at work.
-
Member
- Join Date
- Oct 21st, 2005
- Location
- Vancouver, Wa
- Posts
- 1,154
- Vehicles
- 1993 Audi S4
08-01-2012 12:59 AM
#6
Thanks Brian Originally Posted by skidplate
I know Rob, he knows his $#!t..just didn't know he was back at Schwabbies
-
Member
- Join Date
- Oct 10th, 2006
- Location
- Tualatin, OR
- Posts
- 592
- Vehicles
- 88 Jetta coupe 16vt quattro/ 99 dodge ram 2500 4x4/ 2003 Harley Dyna low
08-01-2012 01:06 AM
#7
Thanks, that means a lot!!!!
"Just because no one has done it, doesn't mean it can't be done."
"If you can't buy it, build it.. If it can't be built, maybe you really don't need it!!"
-
Member
- Join Date
- Mar 13th, 2010
- Location
- Beaverton, Or
- Posts
- 1,272
- Vehicles
- Scirocco 16v, A6 Bi-turbo, 89 GLI
08-01-2012 04:06 PM
#8
Rob, does your Les Schwab have an in ground lift?
-ASE Certified-
Originally Posted by brobs is back
-
Member
- Join Date
- Oct 10th, 2006
- Location
- Tualatin, OR
- Posts
- 592
- Vehicles
- 88 Jetta coupe 16vt quattro/ 99 dodge ram 2500 4x4/ 2003 Harley Dyna low
08-01-2012 06:50 PM
#9
We have the newest flush to found hoist, and the newest hunter alignment machine.. boss got me upgrades last winter... I'm a happy mechanic now!!!!!
"Just because no one has done it, doesn't mean it can't be done."
"If you can't buy it, build it.. If it can't be built, maybe you really don't need it!!"
-
Member
- Join Date
- May 29th, 2007
- Location
- Portland, Oregon
- Posts
- 7,697
- Vehicles
- JDM YO!
08-01-2012 11:41 PM
#10
Speed Concept in Beaverton will do lowered cars for $80.
Originally Posted by gillano
Originally Posted by Joel Goodson
-
Member
- Join Date
- Oct 21st, 2005
- Location
- Vancouver, Wa
- Posts
- 1,154
- Vehicles
- 1993 Audi S4
08-02-2012 04:11 AM
#11
i believe it's $60 front $80 4-wheel at Schwabbies with Rob. Originally Posted by Xyphyr
Speed Concept in Beaverton will do lowered cars for $80.
-
Member
- Join Date
- Oct 10th, 2006
- Location
- Tualatin, OR
- Posts
- 592
- Vehicles
- 88 Jetta coupe 16vt quattro/ 99 dodge ram 2500 4x4/ 2003 Harley Dyna low
08-02-2012 08:44 AM
#12
$56.25 for front only, $83.50 for all four. Mk4 and newer vw require shims for the rear, we do not charge extra for the shims.
"Just because no one has done it, doesn't mean it can't be done."
"If you can't buy it, build it.. If it can't be built, maybe you really don't need it!!"
-
Member
- Join Date
- Aug 31st, 2009
- Location
- portland oregon
- Posts
- 1,998
- Vehicles
- w124 300E 3.2L 24v
08-02-2012 11:22 AM
#13
just got one done at line-up shop on sandy and stark and their racks are flush in ground for $45
DubSaints Alpine White supremacist
-
Member
- Join Date
- Oct 10th, 2006
- Location
- Tualatin, OR
- Posts
- 592
- Vehicles
- 88 Jetta coupe 16vt quattro/ 99 dodge ram 2500 4x4/ 2003 Harley Dyna low
08-02-2012 02:54 PM
#14
Not bashing them, but I have fixed several of there alignments since I started at this store.... I personally, would not recomend them......
"Just because no one has done it, doesn't mean it can't be done."
"If you can't buy it, build it.. If it can't be built, maybe you really don't need it!!"
-
Member
- Join Date
- Oct 10th, 2006
- Location
- Tualatin, OR
- Posts
- 592
- Vehicles
- 88 Jetta coupe 16vt quattro/ 99 dodge ram 2500 4x4/ 2003 Harley Dyna low
08-03-2012 03:27 PM
#15
So Nick, how does your car drive now???
"Just because no one has done it, doesn't mean it can't be done."
"If you can't buy it, build it.. If it can't be built, maybe you really don't need it!!"
-
Member
- Join Date
- Apr 24th, 2009
- Location
- Oregon City, OR
- Posts
- 1,501
- Vehicles
- 98 Cabrio, 1983 302 RX-7, 1978 F250,02 Beetle TDI, 86 Ranger 4x4,83 16Vaba-T cabriolet project
08-04-2012 11:43 AM
#16
im SO bringing my mk3 to you when i get the new rear struts in Originally Posted by rjc69
question, any way you could quote me for replacing the front control arm bushings on both sides on a 98 vr jetta? i'll need a 4 wheel alignment with that-VDUBN-
Team Creampie
My Car looks Dumped cuz theres Hookers in the Trunk
Originally Posted by 942drvento
Instead of the Beer Avatar they need a Blunt Originally Posted by uzi did it
-
Member
- Join Date
- Oct 10th, 2006
- Location
- Tualatin, OR
- Posts
- 592
- Vehicles
- 88 Jetta coupe 16vt quattro/ 99 dodge ram 2500 4x4/ 2003 Harley Dyna low
08-04-2012 10:17 PM
#17
Off the top of my head, I'm thinking about $300.00.... That includes the alignment... I can look it up on Monday and give you an exact price.....
"Just because no one has done it, doesn't mean it can't be done."
"If you can't buy it, build it.. If it can't be built, maybe you really don't need it!!"
-
Member
- Join Date
- Apr 24th, 2009
- Location
- Oregon City, OR
- Posts
- 1,501
- Vehicles
- 98 Cabrio, 1983 302 RX-7, 1978 F250,02 Beetle TDI, 86 Ranger 4x4,83 16Vaba-T cabriolet project
08-05-2012 06:17 PM
#18
that would be sweet, looking to get it done soon Originally Posted by rjc69
-VDUBN-
Team Creampie
My Car looks Dumped cuz theres Hookers in the Trunk
Originally Posted by 942drvento
Instead of the Beer Avatar they need a Blunt Originally Posted by uzi did it
-
Member
- Join Date
- Oct 10th, 2006
- Location
- Tualatin, OR
- Posts
- 592
- Vehicles
- 88 Jetta coupe 16vt quattro/ 99 dodge ram 2500 4x4/ 2003 Harley Dyna low
08-06-2012 08:43 AM
#19
Our store number is 503-231-8290.. just ask for me, Rob.....
"Just because no one has done it, doesn't mean it can't be done."
"If you can't buy it, build it.. If it can't be built, maybe you really don't need it!!"
-
Member
- Join Date
- Oct 21st, 2005
- Location
- Vancouver, Wa
- Posts
- 1,154
- Vehicles
- 1993 Audi S4
08-07-2012 02:35 AM
#20
it drives a lot better thanks...now just trying to track down and fix all the rattles and squeaks on a 20 year old car..driving me nuts! Originally Posted by rjc69
-
Member
- Join Date
- Apr 12th, 2005
- Location
- PNW
- Posts
- 10,838
- Vehicles
- 2000 CabriHo
08-07-2012 12:48 PM
#21
Lol good luck. and I see what you did there. Nice name change Originally Posted by URTurboFreak
it drives a lot better thanks...now just trying to track down and fix all the rattles and squeaks on a 20 year old car..driving me nuts!
-
Member
- Join Date
- Oct 21st, 2005
- Location
- Vancouver, Wa
- Posts
- 1,154
- Vehicles
- 1993 Audi S4
08-07-2012 09:21 PM
#22
clever eh? Originally Posted by Alliegator
Lol good luck. and I see what you did there. Nice name change
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
For advertising information click HERE
