--- WAGEN-WHEELS.COM --- WW1 16x7 16x9 17x8 18x8.5 18x9.5

[WAGEN-WHEELS.COM]

Conical seat lugs are required

Wheels will include blank centercaps

Free shipping to the lower 48 States





Specs:

16x7 5x100 +15 57.1mm hub 1" lip 18lbs
16x9 5x100 +25 57.1mm hub 2.5" lip 19lbs

17x8 5x100 +25 57.1mm hub 1.5" lip 21lbs

18x8.5 5x100 +30 57.1mm hub 1.5" lip 24lbs
18x9.5 5x100 +30 57.1mm hub 2.75" lip 24lbs

Price for 16" is $599/set ORDER HERE

Price for 17" is $699/set ORDER HERE

Price for 18" staggered or non staggered is $799/set ORDER HERE

[arnett1976]

wish they had those 16s when I bought the 17x8s I would have loved them staggered in 16!

[jazzcat2001]

may be a stupid question but are these two piece wheels? im really wanting a staggered set of 16s but waiting to see what another set of wheels does first.

[WAGEN-WHEELS.COM]

may be a stupid question but are these two piece wheels? im really wanting a staggered set of 16s but waiting to see what another set of wheels does first.

They are 1 piece

[imjustc0dy]

When's a next batch suppose to be made? Need some 114.3 mm's and I'd be sold

[MyRedMk]

I have a 93 Corrado on H&R coils and I am wondering what clearance issues I would run into with the 16x9's or would 16x7 be a better fit all around. Also will they both clear VR break setup?

[WAGEN-WHEELS.COM]

I have a 93 Corrado on H&R coils and I am wondering what clearance issues I would run into with the 16x9's or would 16x7 be a better fit all around. Also will they both clear VR break setup?

I'd recommend going staggered or running 16x7 all around. They clear VR6 brakes.

[veersixxx]

Have these on a mk3 cabrio vr6, 16x9" et 25 all around w/ Nitto NeoGen 205/40 tires. Vr mk3 control arms & 5x100. No spacer needed on front w/ DE 11.3" brakes, I would only recommend that you grind down the casting marks on the outer most edge of the caliper. Of course test fit before trying to show off to your buddies! Haha

5x100 16x9" et25 front with no spacers, and used 5 mm spacers on rear to not only be able to use a center cap but also looks wild! Helps even things out and not poke too much.





I love these wheels

[elgatov16]

I'd recommend going staggered or running 16x7 all around. They clear VR6 brakes.

Any spacers needed when going staggered 16x7 16x9 on a 93 corrado? Looking to roll the fenders and going with a bit lower ride height (using koni coilovers)

[WAGEN-WHEELS.COM]

Any spacers needed when going staggered 16x7 16x9 on a 93 corrado? Looking to roll the fenders and going with a bit lower ride height (using koni coilovers)

You'll need 5mm spacers in the back or the centercaps won't clear the hubs.

[vw2.8sixxx]

Wondering what the 16x7 et 15 would look like on the front of a vr, that offsets kinda low

[WAGEN-WHEELS.COM]

Wondering what the 16x7 et 15 would look like on the front of a vr, that offsets kinda low

Since they are only 7" wide, the +15 will still work fine. If anything they might poke by a few mm. If you don't like that, then you quote easily adjust the camber.

[stark9dubber]

any issues running staggered 18's on a mk4 gti? going to be on ultimos in a couple weeks. same question applies for the akzents as well. thanks.

[WAGEN-WHEELS.COM]

any issues running staggered 18's on a mk4 gti? going to be on ultimos in a couple weeks. same question applies for the akzents as well. thanks.

No issues at all. They will clear aftermarket suspension without spacers too.

[SAMSABOTAGE]

How would the fitment be on 16x9 all around on my gti I have koni coils Zimmerman upgraded 11.3 driver edition brakes?

[WAGEN-WHEELS.COM]

How would the fitment be on 16x9 all around on my gti I have koni coils Zimmerman upgraded 11.3 driver edition brakes?

16x9 will need spacers to clear the brakes up front. 5mm clears stock VR6 brakes.

[shanewoodworth]

Ordered a set last night.

[WAGEN-WHEELS.COM]

Ordered a set last night.

Thanks for the business.

[TSFACULTY]

looking to buy 16x9 all around for my mk3 jetta next month anything I should keep in mind? in stock?

[WAGEN-WHEELS.COM]

looking to buy 16x9 all around for my mk3 jetta next month anything I should keep in mind? in stock?

If your car is a VR6, you'll probably need a small spacer to clear the brakes up front. These are in stock now.

[zroman610]

so if i have the stock rc's on my gli, the lugs i have won't work correct? i was always a little confused about ball seat/ conical

[WAGEN-WHEELS.COM]

so if i have the stock rc's on my gli, the lugs i have won't work correct? i was always a little confused about ball seat/ conical

Those will not work since they are ball seat.

[zroman610]

Those will not work since they are ball seat.

thanks, will be placing an order shortly!

[daftendire]

What length bolt would I need with a staggered set up on an mk4?

[WAGEN-WHEELS.COM]

What length bolt would I need with a staggered set up on an mk4?

14x1.5 28mm shank conical seat.

[veersixxx]

1997 gti vr6
16x9 et25 ww1 w/ ground front calipers and 5mm on rear.

[WAGEN-WHEELS.COM]

Thanks for the pics.

[veersixxx]

Thank you for an awesome wheel!! Debating buying my 2nd set so i don't have to "rob Peter to pay Paul"

[WAGEN-WHEELS.COM]

Thank you for an awesome wheel!! Debating buying my 2nd set so i don't have to "rob Peter to pay Paul"

Do it!

[shanewoodworth]

18x8.5 5mm spacers - 205/40r18

18x9.5 - 215/40r18







Thanks for the awesome reps.


I'll get some good pictures soon.

[WAGEN-WHEELS.COM]

Thanks for the awesome reps.


I'll get some good pictures soon.

Thanks for the pics! Let me know when you get some more and I'll post them on FB.

[Mk3!]

I'm gonna get a set of these if my wheels sale

[WAGEN-WHEELS.COM]

I'm gonna get a set of these if my wheels sale

[sean01s4]

Will be calling you guys in the am for a set of these

[WAGEN-WHEELS.COM]

Will be calling you guys in the am for a set of these