The outer CV spline was a touch too small and slipped/stripped under load. There is more than one size outer spline....ask me how I know.
+ Reply to Thread
Results 1 to 7 of 7
Thread: Car won't move !! Please help :(
-
Junior Member
- Join Date
- Sep 25th, 2011
- Posts
- 73
Car won't move !! Please help :(
08-03-2012 08:26 PM
#1
so i just changed my front axle on a 2001 s4 and after that i drove it for a little then i came to a stop. i tried putting it back in first gear And going, but the car doesnt move. it just revs up and the speedometer goes up as if its accelerating. minor clinking noise. what is it??
-
Member
- Join Date
- Jun 17th, 2003
- Location
- Newport News VA
- Posts
- 914
- Vehicles
- 2001 allroad 6sp, 98 GTi TDi, Caddy TDi to be
08-03-2012 08:57 PM
#2
Malone tuning services available- Contact Ben at MaloneTuningVA@gmail.com
http://malonetuning.com
MK4, B5, B5.5 remote window control recoding available and VCDS MK5/6. SKC retrieval, Cluster matching, IMMO programming/delete.
-
Junior Member
- Join Date
- Sep 25th, 2011
- Posts
- 73
08-03-2012 09:05 PM
#3
i just felt my shaft and its loose... so is the transmission screwed!?
-
Member
- Join Date
- Jun 17th, 2003
- Location
- Newport News VA
- Posts
- 914
- Vehicles
- 2001 allroad 6sp, 98 GTi TDi, Caddy TDi to be
08-03-2012 09:22 PM
#4
Depends where it is loose. The joint could have failed
Malone tuning services available- Contact Ben at MaloneTuningVA@gmail.com
http://malonetuning.com
MK4, B5, B5.5 remote window control recoding available and VCDS MK5/6. SKC retrieval, Cluster matching, IMMO programming/delete.
-
Junior Member
- Join Date
- Sep 25th, 2011
- Posts
- 73
-
Member
- Join Date
- Jun 17th, 2003
- Location
- Newport News VA
- Posts
- 914
- Vehicles
- 2001 allroad 6sp, 98 GTi TDi, Caddy TDi to be
08-09-2012 01:35 PM
#6
Cheap Chinese joints, very possible. What did you find?
Malone tuning services available- Contact Ben at MaloneTuningVA@gmail.com
http://malonetuning.com
MK4, B5, B5.5 remote window control recoding available and VCDS MK5/6. SKC retrieval, Cluster matching, IMMO programming/delete.
-
Member
- Join Date
- Feb 4th, 2008
- Location
- SoCal
- Posts
- 7,278
- Vehicles
- Eleanor B5 S4 <3
08-09-2012 09:40 PM
#7
No, S4 Quattro is Torque sensitive. If it detects any axle slippage or it the axles give anywhere it wont let you move the car..
Originally Posted by mnajjar
if one axle fails the car will not move. It will send all the power to the broken axle.
Ask me how I know lolLast edited by NYEuroTuner; 08-09-2012 at 09:46 PM.
<-- Psst Click me
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
For advertising information click HERE
