looks similar to the maf plug, you got that plug accounted for?
I'm in the process of doing a semi-wire tuck and I've lost track of this one connector. All others are labelled and accounted for but for some reason I didn't label this one
it comes from the harness that goes to the fuse box on top of the battery (originally). I can't remember if it was more towards the front of the car or if it went up the wire cowl.
anyone know what that is?
yep maf is accounted for
can anyone maybe take a look under their hood? it should be easy to spot and trace. If you look at the top of the battery you'll see the fuse box - follow the wires from the plug connected to the fuse box itself and maybe 3-4 inches down that wire bundle is where the plug in question is.
I just can't remember if it was connected to something near the rad support somewhere or if it went up the other way through the harness cowl up towards the firewall etc...... I know I marked every single plug but the masking tape that I used musta come off this one plug (who knows).
Can anyone take a look at the plugs / wires that are mounted on a bracket connected to the starter? I remember there being a similar sized plug there.... can anyone confirm?
Last edited by 24vGTiVR6; 08-08-2012 at 09:44 PM.
I traced back where I put the plugs that slide onto the starter bracket - I think those are the ones we're both talking about. There's a metal bracket that bolts onto the starter and a couple plugs meet up there along with the SAI pump plug etc. Just where does that connect to?
I don't wanna put the engine back in until I sort this out.... just in case I need to move the wiring around. Does anyone have a pic of the main harness in a BDF? I can't seem to find one, only the engine harness shows up in my searches.
Last edited by 24vGTiVR6; 08-09-2012 at 04:41 PM.
nope, I've got that one accounted for. ugh this is frustrating. I didn't cut anything except for the part of the harness that had the windshield washer jets and the side fender markers. and I bloody marked everything with masking tape but this one fell off. If it plugs into some other part of the harness I'm just not seeing it.
thanks for trying so far tho guys I appreciate it. it looks like I gotta unwrap everything and lay it all out on the floor again
if anyone has any clue plz let me kno. I really don't wanna take this all out again....
Last edited by 24vGTiVR6; 08-09-2012 at 03:31 PM.