Halogen to Bixenon- Conversion

[shanekk22]

Hi

I have changed my lights to Led lights on my A4 B8 2009 i had to upgrade the controller for the high and low beam to work.

Codes i was giving is

[09 – Cent. Elect.]
[Coding - 07] -> Long Coding Helper

Byte 0: From 69 → 26
Byte 2: From 00 → 10
Byte 14: From 7F → 1D
Byte 15: From 5F → 0D

But i cant change 69 to 26 keeps saying Code Rejected Out Of Range, Is there some other code could be used instead of 26? or any1 know what i could do?

[Ben Franklin]

Hi

I have changed my lights to Led lights on my A4 B8 2009 i had to upgrade the controller for the high and low beam to work.

Codes i was giving is

[09 – Cent. Elect.]
[Coding - 07] -> Long Coding Helper

Byte 0: From 69 → 26
Byte 2: From 00 → 10
Byte 14: From 7F → 1D
Byte 15: From 5F → 0D

But i cant change 69 to 26 keeps saying Code Rejected Out Of Range, Is there some other code could be used instead of 26? or any1 know what i could do?

By "upgrade the controller" do you mean you needed to get another control module or you just needed to change the coding?