To do what you are asking would require you to weld in a VR6 trunk Floor pan.
Not very feasible. Doable? Sure, anything is...
#1
Hello,
I have a G60 car . What I like to do is put the The larger 18 gallon fuel tank for more range. I would like someone who has done this give some advice on this. Is there other options out there that will also work.........Thanks for your time.............
#2
To do what you are asking would require you to weld in a VR6 trunk Floor pan.
Not very feasible. Doable? Sure, anything is...
#3
The Professor
Melbourne, FL
92 Corrado OBD2 ABA Powered by MS3Pro
M & L EFI Performance
#4
I know for a fact VR6 tanks do NOT fit G60 bodys.
Your only pratical option is a fuel cell.
![]()
500HP 1990 Cowrado
#5
If you want more range swap a TDI in to it![]()
Throw an Audi engineer down a hole with a ladder and he will fashion a shovel from it and tunnel his way out
#6
Yep - you have to cut out the floor pan.
It sits about 1.5 inches higher than the G60 fuel tank - so the floor has to go.
![]()
Last edited by hallkbrd; 05-12-2013 at 08:44 AM.
A life frittered away disgusts God; he loves those who run straight for the finish line.
Never Ending 1.8T Corrado Project