Can you compare MKV projector fogs to MKVI fogs? How much fab work would be needed to make the projectors fit?
Some of you may know me and many of you followed Paul. As you know, Paul has moved on to persue other adventures and we wish him well.
We will continue to provide the same service and great prices here at Keffer VW. Feel free to ask any questions you have regarding parts and your car, and we will do our best to provide information.
I plan on doing the install as soon as I can get my hands on a set. looking to spend no more than $80 for a new set since I've seen them sell for that before but cant find the site I had seen them on...
The GLI Skirts only attach with 3 or 4 pre-installed plastic clips that push into the body-plug holes under the car and 2-sided taped to the rocker (tape is pre-installed). Be sure when you are installing the clips that they go in wicked-straight or you will risk damaging part of the bracket.
I got the same instructions you are seeing with the GLI sideskirts. The document shows a mk5 jetta however when I checked VW's own software repair catalog the up to date instructions are VERY different and rightly show the need for 5 screws WITHOUT touching those in the wheel well liner. I have no clue why VW supplies the dated instructions with the GLI side skirts as you don't need primer or glue either for their installation.
Thanks for the part number. It's given me an idea of what dimensions I should be looking at
Last edited by Verebs1; 08-16-2012 at 11:39 AM.
5C7 858 529 A PT1
5C6 867 439 A PT1
5C6 867 440 A PT1
5C6 867 449 A PT1
5C6 867 450 A PT1
Plus shipping to Russia. Just for information, I want to compare prices.
VW Jetta 2011 TSI 1.4 Turbo Twincharger 150 HP + DSG-7 Silver Frost
Kessy - Coming/Leaving Home + TPMS + ESP OFF
Also for the trim they are going to need to know more about the car like model and bulid date. if you check the side panel on the left or right side of the dash look for a sticker on it with a date code like 10/11 or something similar.
I need part numbers (and info) for the following items:
GLi (2012) front bumper:
Gli (2012) lower mesh insert:
Gli (2012) mesh grill:
Gli (2012) fog lights:
Assuming this all fits over the standard Jetta Reo bar etc. Also I might need part numbers on any screws / adaptors / plugs etc. that are needed to fir this that I might not already have from pulling off my factory bumper (also will need install instructions)
2012 GLI Autobahn Deep Black Metallic
APR Stage I ECU + Carbonio Intake