Feeler custom 2.0t down pipes

[adam4490]

Hey guys i was woundering if i mass produce down pipes that would be 3 in no cat stailess steel would u guys buy them i will have mine on my car here shortly so i can post pics then would sell for like 250 not including shipping

Sent from my SPH-D710 using Tapatalk 2

[olson23849]

I'm interested, where in PA are you located?

[adam4490]

Near harrisburg let me get one mad and i will post pics then we r mocking one up in soild works now

Sent from my SPH-D710 using Tapatalk 2

[adam4490]

Here it is
Sent from my SPH-D710 using Tapatalk 2

[DeepSeaDynamo]

once you get some installed pics I may be interested, get some detail pics of the welds

[adam4490]

Sounds like a plan

Sent from my SPH-D710 using Tapatalk 2

[adam4490]

Goin to start fabing mine up this weekend let me know if anybody in interested will run u about 250

[adam4490]

heres the 90 out of the turbo

[theGLIguy]

heres the 90 out of the turbo

it better look alot cleaner then that for what your asking, for half that price you can get the ebay. you should try tig welding then, it looks alot cleaner and stronger

[adam4490]

Yeah i agree 100% about the tig welding but i only have a mig and everything will be grinded out I am also trying to find prebent 90 and 45 degree pieces and buy a bunch of them at once

[SJD666]

catless? would you be able to produce them with test pipe and flanges also would the oem gasket be used'?

[adam4490]

They will be catless and i jave 3in t3 flanges made so no the oem flange will no be used

[adam4490]

And no test pipe

[RobbS]

If you charged $275-$300 with a cat and O2 bungs welded in (High flow cats are like $60, bungs are about $2), I think you'd have people swarming to you. But for $250, you can go to ebay and buy two catless downpipes. There are also not many people running anything with a t3 flange, so that kind of limits your market. I mean no offense by this post, so please don't take any.

Also in Harrisburg, so sub'd for interest.

[adam4490]

We will be making a vband style after this is done will be done tomorrow

[blackvento36]

heres the 90 out of the turbo

Wow, all the pie cuts, welding, and grinding is pretty insane considering you can spend $40 for a 180 degree 304 stainless U-bend..........not to mention it's about 10x better. You only need one U-bend to make a MKV downpipe.
http://www.mandrel-bends.com/catalog...-bend-553.html


Made that 5 years ago and haven't touched it since I put it on the car, Kinda wish it would break (not really) cuz now I have a TIG

BTW, you should be using 308 stainless wire and argon if you are MIG welding 304 stainless tubing. Looking at the oxidation around the welds it looks like you're using mild steel filler and co2

[adam4490]

Im not using stainless and im not really sure where im getting all my materail yet chill

[adam4490]

Where can i get a cheap high flow cat

[adam4490]

down pipe is all done and it sounds amazing

[adam4490]

Bump

[RobbS]

Make a sound clip yet?

[adam4490]

I will try and make a sound clio here shortly

[FahrenheitFarmer]

Why buy this over the ebay pipe?

Before making a 'feeler' in the classifieds section, you might want to keep threads like this in a regional forum, so you dont scare away everyone with your potato welds before you actually get a prototype for what you're selling.

GLWS

[nicyousuckk]

Why buy this over the ebay pipe?

Before making a 'feeler' in the classifieds section, you might want to keep threads like this in a regional forum, so you dont scare away everyone with your potato welds before you actually get a prototype for what you're selling.

GLWS

Why even mention this? There needs to be moderation in this area. Too many people coming on peoples sale threads and dumping on what they have to sell. Let the buyers decide whether or not it's worth it.

[adam4490]

Agree

[FahrenheitFarmer]

Why even mention this? There needs to be moderation in this area. Too many people coming on peoples sale threads and dumping on what they have to sell. Let the buyers decide whether or not it's worth it.

This is a feeler, asking for opinions and personal preference, not a for sale thread. OP said 'would you be interested?'

[adam4490]

bump

[kiserhd]

no

[adam4490]

no

no wat lol

[adam4490]

bump

[theGLIguy]

no wat lol

No, looks like ass. Welds look like crap, try tig welding instead, mig looks like someone made it in a junk yard with all the cuts put together, the idea of an exhaust it so have it free flowing and with all the cuts you have and with the welds penetrating though, not impressive at all. everyone on here wants a clean and professional product. Yours sir, is not

[rbyellow5]

ouchies

[FahrenheitFarmer]

then would sell for like 250 not including shipping

Worse than ebay downpipes at twice the price.

Rethink your product or your price OP, neither look good.

[lkgti]

Ah cmon give the guy a break.....I'm mean...I wouldn't buy it but at least he tried lol.

Sent from my DROID RAZR using Tapatalk 2

[adam4490]

its called trying to support your family and the down pipes that i make may not look the best but u dont drive ur car upside down u can see them and they still add power just like the 500 down pipes i dont like to buy new parts i think they are way over price and if i had a tig welder i would be using it instead