2010 cc sport h&r springs, stock 17" wheels , what spacers?

[LESCC]

I could do a search and I am sure I would find what I need. Plus before you all start telling me I need different wheels I do everything with cash as I can afford it. Larger Wheels would look better I understand this, but I cant afford it at this time. Just looking for what spacers people have used with factory 17's to get them closer to flush.

Thanks in Advance!

Les

[FastB7S4]

Assuming that the factory 17s are +41mm offset, then for perfect flush you should get 12mm spacers for the front and 5mm for the rear. To keep it on the cheap, you could just get 10mm for the front and call it a day.

[Epence]

i got 8mm front spacers...wasn't sure about 12 or 10mm both "might" rub the fender frame.

[FastB7S4]

12 is perfectly flush for the front. This is the most common set-up if you search. As long as you are not super low on coils and are running stock wheels, this is the perfect set-up.

12mm front


5mm rear

[AZ_CC]

12 is perfectly flush for the front. This is the most common set-up if you search. As long as you are not super low on coils and are running stock wheels, this is the perfect set-up.

12mm front


5mm rear

Got any pics from a distance and from some angles?....also what r u lowered on?

[FastB7S4]

Got any pics from a distance and from some angles?....also what r u lowered on?

don't really have many pictures but here are some. i'm lowered on eibach pro-kit springs.