What do you consider expensive? If all of the parts are there, most indy shops will charge under $200 to do it right, from my experience. There's a resources thread at the top of the page.
#1
Greetings all! First time posting in the regional board (didn't know it existed until this morning!).
The thought of installing my H&R cup kit I bought on the classifieds scares me to death and the prices I'm getting back from general shops and VAG specific shops is out of my price range at the moment so I was wondering if anyone does this on the side, obviously payment would be involved in monetary funds, food, beer, etc. and my generous help for learning.
I don't have any of the tools required (go figure right), but can get the replacement axel bolts if necessary from the dealer or online.
Now sure how long the install would take, but if you can let me know that, scheduling is tight at the moment so that may play into things a little bit.
Located in Gilbert, willing to travel anywhere in the Phoenix metro area for quality work![]()
2008 Audi A3 2.0T | K&N Typhoon CA Intake | Pioneer AVH-4300DVD HU w/ XM & DVD bypass | H&R Cup Kit w/ Sport Springs | Full LED Interior | LED License Plate Lights | Ashtray Delete | Rear Wiper Delete | Shaved Badges | Black Rings | Carbon Fiber Di Noc Wrapped Interior
#2
What do you consider expensive? If all of the parts are there, most indy shops will charge under $200 to do it right, from my experience. There's a resources thread at the top of the page.
#3
I've sent out emails to some of the shops in the resources as well, but I figured I'd throw this out there for anyone with a MKV or A3 that might have done this. I have all the parts in hand, a few shops quoted me $800 for the work and just a general brake/suspension/etc. shop that doesn't specialize in Euro cars said $400 so $200 is definitely in my price range as the tools themselves I've priced to be about $80-$100 to DIY.
2008 Audi A3 2.0T | K&N Typhoon CA Intake | Pioneer AVH-4300DVD HU w/ XM & DVD bypass | H&R Cup Kit w/ Sport Springs | Full LED Interior | LED License Plate Lights | Ashtray Delete | Rear Wiper Delete | Shaved Badges | Black Rings | Carbon Fiber Di Noc Wrapped Interior
#4
I don't remember what Derek charges off the top of my head, but try Exklusiv Motorsports. It's far from you, however.
$800 for a cup kit install is![]()
#5
I got my coils installed for $280 from a local Indy shop. They did a horrible job and I have since removed them (myself) and sold them. Be sure wherever you go that they have extensive experience on late model VW suspension, which my guy obviously did not.
#6
Just got another quote back for $500 for install and alignment. Maybe its best to go at it myselfI'll give Exklusiv a call and see, don't mind the drive if its quality work and reasonably priced.
2008 Audi A3 2.0T | K&N Typhoon CA Intake | Pioneer AVH-4300DVD HU w/ XM & DVD bypass | H&R Cup Kit w/ Sport Springs | Full LED Interior | LED License Plate Lights | Ashtray Delete | Rear Wiper Delete | Shaved Badges | Black Rings | Carbon Fiber Di Noc Wrapped Interior
#7
#8
#9
You don't need an alignment when swapping struts.
The rear is IRS and the front has a "drop and bolt in" set up.
#10
Alignments are cheap - tires aren't
It's worth it to have it checked to make sure the drop doesnt add any toe, which is what kills tires the fastest.
#11
Email Reply Sent!
Also, as I mention in there, I'm getting new tires and wheels sometime between the 21st and 23rd, if I can mesh up this install a few days before those come in I'll be having an alignment done with the new stuff goes on
I'll wait for your reply to my email and hopefully we can set up an appt.
2008 Audi A3 2.0T | K&N Typhoon CA Intake | Pioneer AVH-4300DVD HU w/ XM & DVD bypass | H&R Cup Kit w/ Sport Springs | Full LED Interior | LED License Plate Lights | Ashtray Delete | Rear Wiper Delete | Shaved Badges | Black Rings | Carbon Fiber Di Noc Wrapped Interior
#12
It kind of floored me because I called a few Brake-Master-Lube-Econo-We-Service-Cars places and they only quoted about $400 for everything, not that I'd trust a jack-of-all-trades place to a Euro car (although I'm sure they do good work), it just seemed like everyone was all over the place on price.
2008 Audi A3 2.0T | K&N Typhoon CA Intake | Pioneer AVH-4300DVD HU w/ XM & DVD bypass | H&R Cup Kit w/ Sport Springs | Full LED Interior | LED License Plate Lights | Ashtray Delete | Rear Wiper Delete | Shaved Badges | Black Rings | Carbon Fiber Di Noc Wrapped Interior
#13
#14
2008 Audi A3 2.0T | K&N Typhoon CA Intake | Pioneer AVH-4300DVD HU w/ XM & DVD bypass | H&R Cup Kit w/ Sport Springs | Full LED Interior | LED License Plate Lights | Ashtray Delete | Rear Wiper Delete | Shaved Badges | Black Rings | Carbon Fiber Di Noc Wrapped Interior
#17
Thanks for all your help guys, I scheduled an appt with Derek at Exklusiv for next week.
for you all!
2008 Audi A3 2.0T | K&N Typhoon CA Intake | Pioneer AVH-4300DVD HU w/ XM & DVD bypass | H&R Cup Kit w/ Sport Springs | Full LED Interior | LED License Plate Lights | Ashtray Delete | Rear Wiper Delete | Shaved Badges | Black Rings | Carbon Fiber Di Noc Wrapped Interior
#18
side note...
front strut replacement on said A3 is 2.80/hr
rear strut replacement is 1.80/hr
does not include alignment
so if we do math:
4.60hr/$800.00=173.91/hr.
derek your dumb you can charge 150/hr and still make money
did they use this?
![]()
Last edited by vortexpert.; 08-30-2012 at 07:05 PM.
#19
It also says It takes 2 hours for an axle on a rabbit. (mk5) it takes me 30 mins.
I dd springs and struts ona mk5 in 2 hours.
Just because the book says it takes that long doesn't mean it does.
When I ran my shop I would charge people a little under book. In all reality if you know the car/job make the honest money and don't rip them off.
#20
#21
#22
2010 CC R-line. 5% tint all around,Debadged, Euro Clear Corners, 8k Hid's, LED TAG lights, K&N Filter, VAG-COM windows, H&R springs, Led interior lights
2012 Jetta GLI Autobahn- Stock
15.18 @ 93.44 now time for upgrades.
#23
My God the price quotes are freaking high. Is th a3 suspension actually hard? I know on my mk3 I can do both fronts in under an hour and the rear in a bit less if I have the interior trim out. Alignment is like $60 after that but I have yet to do that and still have good tirewear strings work very well for aligning.
Sent from my Kindle Fire using Xparent ICS Tapatalk 2
#24
#26
#27
#28
Thanks Derek, the ride back to Gilbert from the shop was great, everything feels awesome, even with all the OEM stuff in the hatch.
More pics to come, but:
Before:
After:
![]()
2008 Audi A3 2.0T | K&N Typhoon CA Intake | Pioneer AVH-4300DVD HU w/ XM & DVD bypass | H&R Cup Kit w/ Sport Springs | Full LED Interior | LED License Plate Lights | Ashtray Delete | Rear Wiper Delete | Shaved Badges | Black Rings | Carbon Fiber Di Noc Wrapped Interior
#30
More pics! More low!
Just waiting on my VMR's to come in stock and the project is complete.
![]()
2008 Audi A3 2.0T | K&N Typhoon CA Intake | Pioneer AVH-4300DVD HU w/ XM & DVD bypass | H&R Cup Kit w/ Sport Springs | Full LED Interior | LED License Plate Lights | Ashtray Delete | Rear Wiper Delete | Shaved Badges | Black Rings | Carbon Fiber Di Noc Wrapped Interior
#32
Air or GTFO not herra frusch so no rikey![]()
Last edited by TheZooKeeper; 09-07-2012 at 07:09 PM.
#33
Drop looks good! Can't wait to see the wheels on there.![]()
JB @ VMR | Wheels
714-442-7916 ext 108 | JB@velocitymotoring.com
www.velocitymotoring.com | VMR FACEBOOK | VMR Flickr
V710 Pre-Orders OPEN! | V718 Photoshoot
#34
2008 Audi A3 2.0T | K&N Typhoon CA Intake | Pioneer AVH-4300DVD HU w/ XM & DVD bypass | H&R Cup Kit w/ Sport Springs | Full LED Interior | LED License Plate Lights | Ashtray Delete | Rear Wiper Delete | Shaved Badges | Black Rings | Carbon Fiber Di Noc Wrapped Interior