digifant swap 16v wire question

[eurojulien 318is]

Hey guys,
Been following the diy on the digifant swap (from an 89 golf) on a PL motor in my mk2 jetta. Going well:

But I have one random green wire that comes from the ecu harness that I can't find a home for:


any ideas?


sorry for making a new thread, looks like the diy doesn't get much traffic anymore

Thanks!
Julien

[9aba16vt]

digi 2 i take it? what car did it come from?

Edit: i skipped reading in school... lmao.. ill look it up for you.


Is it pin 8 on the ecm?

[laychooba]

the only green you use from the digi 1 computer is the fatter gauge one
for the (-) on the coil. if i recall correctly, i think that wire has something to
do with the A/C.

[hantonyc]

http://www.a2resource.com/electrical/CE2.html

this is your best friend.

[eurojulien 318is]

http://www.a2resource.com/electrical/CE2.html

this is your best friend.

Thanks!!!

still dealing with a no start condition, will start easily with brake parts cleaner but not without. has fuel pressure and spark. Been reading on the distributor hall sensor issues, i guess that's my next step

[eurojulien 318is]

Thanks!!!

still dealing with a no start condition, will start easily with brake parts cleaner but not without. has fuel pressure and spark. Been reading on the distributor hall sensor issues, i guess that's my next step

found out my tps and injector connectors were backwards cranked right up