No spark, No injector pulse

[Dubstuning]

This is actual a 24v 2.8 swap in a corrado but i figured the situation applies to a standard 24v as well. All wiring seems good to go. I went over it a couple more times today when trouble shooting. Basically i have no spark, no injector pulse, no start. Vag com hooks up fine, I can energize the injectors and i register a tach signal in vagcom. Any thoughts? Would a bum cam sensor cause this?

[VW_OwneR_85]

i completed my 24v swap into corrado a few weeks back, had the exact same problem!, although yours could be the cam sensor! but my problem was ecu plug pin 21 wasnt live, hooked it up and boom!! she fired up

here check that your pin out matchs this, lives and earths

[Dubstuning]

i completed my 24v swap into corrado a few weeks back, had the exact same problem!, although yours could be the cam sensor! but my problem was ecu plug pin 21 wasnt live, hooked it up and boom!! she fired up

here check that your pin out matchs this, lives and earths

Thanks and yea i checked all of those. My Scope just got here yesterday so im going to hook up to cam and crank and see how they look.

[VW_OwneR_85]

cool let us know how you get on, is your 24v one with indivdual coils on spark plugs or does it have a single coil pack with ht leads ?

[Dubstuning]

cool let us know how you get on, is your 24v one with indivdual coils on spark plugs or does it have a single coil pack with ht leads ?

individual coils