FSI...but you can use the TSI.
#1
I have been doing a little bit of research on the 1.8t to 2.0t coilpack conversion settup... The only thing that I am having a hardvtime figuring out is the type of coil to use, fsi or tsi. I have a 2001 jetta with the AWW engine code... What coil would I be leaning more towards?
Thanks,
Kay
#3
Most answers can be found here...
http://forums.vwvortex.com/showthrea...-Contents-1.8t
FSI/ TSI Coil Packs
RED MKV FSI Coil Packs - 06E 905 115
BLACK MKV FSI Coil Packs - 07K 905 715 F
* This is the recommended coil
BLACK MKV TSI Coil Packs - 06F 905 115 F
BLACK MKVI TSI Coil Packs - 06H 905 115
My Build
My FAQ / DIY Thread -- Look here for 90% of the questions you have
FS: New in box, primer'd 20AE body kit (front+rear valences and side skirts) -- PM me for details
FS: Fiberglass 20AE replica spoiler. No scratches. Reflex Silver.
#4
So it really doesn't matter which one? I'm planning on chipping the car up to stage 2 next summer... Do the same specs apply? Obviously the spark plugs would change...
#5
#6
Engine type doesn't matter, only relevant factor is boost pressure to determine plug gap
#7
In other words.
Buy appropriate adapter for your specific valve cover style.
buy coil pack # 07K 905 715 F
My Build
My FAQ / DIY Thread -- Look here for 90% of the questions you have
FS: New in box, primer'd 20AE body kit (front+rear valences and side skirts) -- PM me for details
FS: Fiberglass 20AE replica spoiler. No scratches. Reflex Silver.
#8
I really like the red packs... from my understanding they are about the same as the black packs... Can anybody say otherwise?
#9
Bremi STI coils are red and don't require any extra hardware. You don't need a bigger coil / gap for a stage 2 car.
![]()
PROTECTED BY SMITH & WESSON
MAESTRO - 3"MAF - IE Rifle Drilled Rods - 550cc Bosch EV14 Injectors - Gonzo Tuning GTT K04 Hybrid Turbo - Devils Own Water Meth - Walbro 255 inline - Eurosport FMIC - Peloquin LSD - Madmax wastegate mod - Werk in Progress INTEGRATED ENGINEERING
#10
Okay kiddos, so I did my conversion yesterday:
MkV red 2.0t fsi coil packs
Red Integrated Engineering Adapters
Red coil pack harness protecter
NGK BKR6EIX Iridium spark plugs tapped at .035
![]()
So far so good! My only question is about the gap... It's definitely a trial and error sorta thing, as all cars are different. My car is not yet reflashed or chipped... But it does have:
2.5" catback exhaust
3" downpipe with a highflow cat
Air intake
Forge DV
Race N75
and will be installing a new smic and MAP sensor
Do you think that it is an appropriate gap and spark plug combo?
#11
Yeah, stock.
PROTECTED BY SMITH & WESSON
MAESTRO - 3"MAF - IE Rifle Drilled Rods - 550cc Bosch EV14 Injectors - Gonzo Tuning GTT K04 Hybrid Turbo - Devils Own Water Meth - Walbro 255 inline - Eurosport FMIC - Peloquin LSD - Madmax wastegate mod - Werk in Progress INTEGRATED ENGINEERING
#13
I don't think the coils are much stronger. Maybe you can gap them a little more. I think the main hope is the longevity of a more developed coil. LS2 coils are where you wanna go for big spark gaps.
Gonzo Stage 2+ w/2-stepOriginally Posted by Dwight Shrute
#14
I gapped them at .035... Should I just put them back to .028-.032?
#15
I would drive around a week or two and check the plugs every once in a while. If they look okay then you're probly fine
Gonzo Stage 2+ w/2-stepOriginally Posted by Dwight Shrute
#16
You have no reason to widen the gap or whatever. "IF" they are more reliable put them at .028 or .032 and let them be. You won't gain a thing by changing the gap on a stock turbo.
PROTECTED BY SMITH & WESSON
MAESTRO - 3"MAF - IE Rifle Drilled Rods - 550cc Bosch EV14 Injectors - Gonzo Tuning GTT K04 Hybrid Turbo - Devils Own Water Meth - Walbro 255 inline - Eurosport FMIC - Peloquin LSD - Madmax wastegate mod - Werk in Progress INTEGRATED ENGINEERING
#17
So today I got a uni stage 2 flash... I am currently running NGK bkr6eix Iridium spark plugs at a gap of .33... So now I should go with NGK bkr7... Iridium or coppers?
#18
Ngk 4644
My Build
My FAQ / DIY Thread -- Look here for 90% of the questions you have
FS: New in box, primer'd 20AE body kit (front+rear valences and side skirts) -- PM me for details
FS: Fiberglass 20AE replica spoiler. No scratches. Reflex Silver.
#19
http://forums.vwvortex.com/showthrea...t-done-I-guess
^^^Big Turbo build lots of pics^^^
Best shop for repair and custom workin ma
http://www.wentworthmotorsports.com/