FS: Bahn Brenner Lysholm SC - BBM

[mk_turf]

SOLD

-Bahn Brenner SR2 Lysholm Supercharger (SN 2087 S/C) w/ 76mm-79mm pulley (can't remeber exact size) and oil feed line
-upper and lower intake pipes (the lower pipe that bolts to the sc has a broken mtg tab where it mounts to the alt bracket. still functional or good for the flange to weld whatever pipe needed)
-intake mani adapter
-serpentine idler
-front mounting bracket
-throttle cable bracket
-new serp belt
-3x various silicone boots
not shown:
-4x used Bosch 30lb injectors
-extended throttle cable

not a complete kit but the main parts and pieces...
This was setup on my digi2 8V....was the BBM prototype long ago for this kit that was sold for a short time. About 8 years new but only run approx. 10K miles at 5-7 psi. No end play. excellent condition. Use as replacement or good compressor to build a motor for.

located in Seattle area. Willing to ship but prefer local sale.

Here it is when it was in the car:


pile o parts for you:








here is a complete kit for Digi2 as if it was purchased from BBM back in the day for $3k :


Let me know if you have any questions or offers. thanks

[mk_turf]

...yes, its still in the car...my lazy arse needs to get out there and pull it!....

[mk_turf]

someone needs this!

[capnhowdy]

So, none or the brackets , pullues or mounting hardware are included? Just a charger and intake plumbing?

[mk_turf]

So, none or the brackets , pullues or mounting hardware are included? Just a charger and intake plumbing?

I'm gonna pull this out next weekend, so I guess then I'll know exactly what all is gonna be included. I'd like to keep the Mk3 alternator/serp setup but for the right price I may include. I will also include sc pulley, injectors, throttle cable/bracket and any related hardware/brackets that get removed.

[capnhowdy]

Hmm. I'm looking to install into my mk1 with an aba swap. I guess what I would like to know is how far away from being a complete kit is it. I don't want to spend a lot of time trying to source odds and ends and am interested if it's complete.

You said that it came from a digi2 8v? Maybe this isint the kit I'm thinking of

[capnhowdy]

gahh i was posting from a phone .. sorry about all the typos. and also i couldn't see the pics.

that explains a lot

[mk_turf]

ttt

[mk_turf]

new lower price!

[mk_turf]

offers??
would also consider some trades of the wheel sorts....widened rabbit steelies...RML snowflakes...ATS classics...

[oldschool eighty8]

Pm'd

[pitonview]

Would be interested in this for a replacement unit. Really only need the S/C. other items I have in hand. Why have you chosen to remove this unit and put it up for sale?

[mk_turf]

Would be interested in this for a replacement unit. Really only need the S/C. other items I have in hand. Why have you chosen to remove this unit and put it up for sale?

that's fine...wouldnt take much off the price just for the charger. the other stuff is somewhat useless to me by itself.. prob -$50.
This engine is tired and the digi2 wasn't very friendly to tune. selling this to help finance the carb motor I'm building.

[pitonview]

Well if the unit is as good as you indicate I would be interested. I have been working with Johnny Betz at BBM and would need it shipped to him so he can refit it with the stuff from my old unit. How can we do this, get payment to you quickly, and what's the best we can do on it?
Cheers Mark Green
pitonview@yahoo.com 585-438-4191 585-354-0806

[twinscrewcaddy]

IM sent.

[mk_turf]

SOLD!