Verdict Motorsports - Billet Injector Cups

[Phil@VerdictMotorsports]

After dealing with cracked or leaky injector cups, we decided it was time we do something about it. Machined from 6061 aluminum and anodized for durability and corrosion resistance. Our Billet 1.8T Fuel Injector Cups are a direct replacement for stock.

Installation:
Should be done with the intake manifold out of the car. This is to prevent sealant and whatever other grime is on or around your stock injector cups from dropping into and contaminating the engine. Upon removal of the stock injector cups the intake manifold threads will need to be cleaned prior to installation.

An optional installation kit is available and comes with the following:

- Machined hex tool to remove your stock plastic cups and install the billet replacements.
- Stainless steel wire brush to remove OEM thread sealant from the intake manifold threads.
- Loctite thread sealant to replace the original sealant and ensure a leak free fitment.

We strongly suggest adding an installation kit if you don't have the necessary items to remove, clean and reseal the injector cups properly.


Compatibility:
We offer cups for the following 1.8T engine codes: AEB, ATC, ATW, AWM, AMB, AWD, AWW, AWP, AMU, BAM and BEA. For compatibility of other engine codes, feel free to drop us a line.

Free Shipping:
Has been extended throughout the continental United States until 5/31/13. Enter the words "Free Shipping" in the coupon code box and receive FREE Priority Shipping! We're happy to ship internationally, however postage will apply to those orders.

All orders can be placed through our website and will ship within 24 hours.

For late style (ATW & AWM) cups Click Here

For early style (AEB) cups Click Here


For any questions, comments or inquiries, feel free to post up or drop us a line.

Phil

[631 Corrado]

got a set already... really great product! big to the guys over at verdict for doing what they do best.

[Phil@VerdictMotorsports]

got a set already... really great product! big to the guys over at verdict for doing what they do best.

Thanks Greg


PMs and Emails replied.

AEB cups will be available very soon

[Richard@VerdictMotorsports]

[MetalMan1]

Hi, I'm VERY interested in your AEB cups. Been wanting to pull my intake manifold to clean and maybe paint it, as well as throw on some new injector O-rings. Are the AEB cups currently ready to ship?

[Phil@VerdictMotorsports]

Hi, I'm VERY interested in your AEB cups. Been wanting to pull my intake manifold to clean and maybe paint it, as well as throw on some new injector O-rings. Are the AEB cups currently ready to ship?

The AEB cups are available for pre-order, which a lot of guys have taken advantage of. The last of the current run will be finished machining tomorrow. From there they are headed to the platers for anodizing and back by Friday.

SO to answer your question, this Friday will likely be when AEB orders are filled and headed out.

[MetalMan1]

Good deal! I just placed my order.

[Phil@VerdictMotorsports]

Good deal! I just placed my order.

Thanks a lot, and feel free to post up with some feedback once you get them installed

[Phil@VerdictMotorsports]

AEB cups are right on schedule...

[Phil@VerdictMotorsports]

A couple pics of the early and late style cups:

[jettaglx91]

wow that seems like a heck of a deal as I imagine they are a pita to make especially the oem plastic ones are as much as $40/pc

[Richard@VerdictMotorsports]

[Phil@VerdictMotorsports]

Happy Columbus Day everyone!

[Richard@VerdictMotorsports]

[Phil@VerdictMotorsports]

Free priority shipping extended through 11/30/12

[MetalMan1]

Over the weekend I finally had a chance to install the billet injector cups in my AEB intake manifold. I must say, for $70 they are incredibly high quality! Threading them in was a little tight after cleaning out the intake manifold threads, but they still went in just fine. And I imagine in this application slightly tight threads is a good thing.

[Noah@VerdictMotorsports]

Over the weekend I finally had a chance to install the billet injector cups in my AEB intake manifold. I must say, for $70 they are incredibly high quality! Threading them in was a little tight after cleaning out the intake manifold threads, but they still went in just fine. And I imagine in this application slightly tight threads is a good thing.

Thanks for the complements

[Phil@VerdictMotorsports]

Thanks for the orders everyone

Feel free to post up your questions as well

[Richard@VerdictMotorsports]

PM's replied.

[kblackwe]

Great product! Props to Phil and everyone @ Verdict. I purchased a set of these for my ATW B5 A4 a few weeks back. Install was straight forward, and solved my 12 year old leaking plastic POS injector cup issues . Thanks again!

[Phil@VerdictMotorsports]

Great product! Props to Phil and everyone @ Verdict. I purchased a set of these for my ATW B5 A4 a few weeks back. Install was straight forward, and solved my 12 year old leaking plastic POS injector cup issues . Thanks again!

Thanks for the feedback, and happy to hear it solved your issue!

[Phil@VerdictMotorsports]

Replied to PMs

[Phil@VerdictMotorsports]

[Phil@VerdictMotorsports]

Currently back ordered on our late style (ATW, AWM) injector cups.

Running more this week and should be shipping those orders by next Monday (12/10).

[Phil@VerdictMotorsports]

Late style injector cups are back in stock as of last week, and all pending orders waiting for these have shipped.

We also decided to redesign the hex tool which is now available separately for everyone who wanted one.



http://www.verdictmotorsports.com/Pr...uctCode=VMS140

[Phil@VerdictMotorsports]

Replied to PMs

[morzechowski]

Great product guys. Thanks for thinking of us

[Richard@VerdictMotorsports]

Great product guys. Thanks for thinking of us

Glad we could help! Thanks for the shout.

[Phil@VerdictMotorsports]

Have a safe and happy New Years everyone!

[Phil@VerdictMotorsports]

Free shipping extended until 2/1/13

[Phil@VerdictMotorsports]

[.Mad Hatter.]

Interesting product. Are they all black or is there an option for the raw finish?

[Phil@VerdictMotorsports]

Interesting product. Are they all black or is there an option for the raw finish?

The last run of the late style cups have a billet / raw finish.

Early style and AEB's are all black anodized.

[Phil@VerdictMotorsports]

Free priority shipping!!

[Phil@VerdictMotorsports]