So i got a new o2 sensor. Cleared the code and still no throttle!?
There were other items scanned, but non related (airbag/door locks/abs)
Do these codes mean the ECU/ECM is shot or that something is wrong with the wiring harness?
VCDS Version: Release 11.11.4
Data version: 20120807
Tuesday,16,October,2012,17:50:37:05301
Chassis Type: 1J - VW Golf/Bora IV
Scan: 01 02 03 08 15 16 17 19 22 29 35 36 37 39 46 47 55 56 57 75
76
VIN: 9BWDE61J424020055 Mileage: 418250km/259888miles
-------------------------------------------------------------------------------
Address 01: Engine Labels: 06A-906-032-AWW.lbl
Part No: 06A 906 032 DL
Component: 1.8L R4/5VT G 0006
Coding: 07500
Shop #: WSC 14390
VCID: 6BDE291B19914540E47
2 Faults Found:
18039 - Accelerator Position Sensor (G79)
P1631 - 35-00 - Signal too High
18042 - Accelerator Position Sensor 2 (G185)
P1634 - 35-00 - Signal too High
Readiness: 0100 1100
-------------------------------------------------------------------------------
Address 17: Instruments Labels: 1J0-920-xx5-17.lbl
Part No: 1J0 920 906 J
Component: KOMBI+WEGFAHRSP VDO V65
Coding: 07232
Shop #: WSC 09128
VCID: 2F66FD0BED09F96088F
9BWDE61J424020055 VWZ7Z0A3994656
4 Faults Found:
01176 - Key
65-10 - Unauthorized - Intermittent
01177 - Engine Control Unit
64-10 - Not Currently Testable - Intermittent
01314 - Engine Control Module
49-10 - No Communications - Intermittent
01304 - Radio
49-00 - No Communications
-------------------------------------------------------------------------------
Address 19: CAN Gateway Labels: 6N0-909-901-19.lbl
Part No: 6N0 909 901
Component: Gateway K<->CAN 0001
Coding: 00006
Shop #: WSC 09128
VCID: F0E4BE77B0B72698515
2 Faults Found:
01314 - Engine Control Module
49-10 - No Communications - Intermittent
01304 - Radio
49-00 - No Communications




