VWVortex


+ Reply to Thread
Results 1 to 3 of 3

Thread: BMW e36 328is w/m3 trans/rear

  1. Member D-rock11's Avatar
    Join Date
    Oct 25th, 2009
    Location
    Lancaster, PA
    Posts
    970
    Vehicles
    Nissan d21 Hardbody
    09-18-2012 04:40 PM #1
    i had this up for trades before, decided im gonna sell so i can buy an e28 and a dirt bike
    FIY, i ran the car into a pole 5 hours after i bought (April 6th 2012 to be exact) there was only cosmetic damage. i had to replace the passenger head light and clear corner, nose panel, passenger fender, and m3 front bumper. the hood was fixed in the corner by a friend who works in a body shop. the only remaining damage is a dent in the rad support so the one headlight bolt doesn't fit. i used a zip tie instead, holds tight and lines up just fine. the clips on the driver side clear corner broke so that is also zip tied. just trying to be honest and not hide anything from the next owner.

    1998 328is
    155k
    m3 trans, rear end, drive shaft with about 130k
    (replacing the center support bearing soon 9/18)
    m50 intake manifold
    spectra air filter
    DDM fogs (1 month old)
    3k hid in the fogs (cut the wires from the fogs, have extras to take it back to non HID)
    10k in the headlights
    city lights are hooked up
    clear tails
    depo headlights
    fk coils
    brand new $140 battery
    Not sure what brand exhaust, but it sounds amazing. no drown on the highways. i can get a sound clip if requested.

    i most likely wont be selling the salad shooters with the car, but if your interested let me know. car will be on the stock style 30's powder coated black with decent tires.

    The paint on this car is amazing. front end was just repainted at the end if august (passenger fender, hood, nose panel, front bumper) and the driver side door and fender were repainted right before i bought it back in april. the previous owner had replaced every single coolant hose on this car. vanos was not rebuilt, but i do have the kit for that which will be included. the only other issues are theres no sunroof switch, headliner is starting to sag slightly in the corners, and the shift knob clips broke so it turns a little but still sticks on pretty good. the front driver seat is a little beat up, and the rears have some black scuffs that should rub out.. i think thats about everything. if you have any other questions let me know.

    Price: $6,000 OBO




    When i first bought it. car will most likely sold on these wheels and put back to this height, message me if you interested in the salad shooters though. angel eye's are gone.


    Most Recent, taken in august.




    -Derrick

  2. Member D-rock11's Avatar
    Join Date
    Oct 25th, 2009
    Location
    Lancaster, PA
    Posts
    970
    Vehicles
    Nissan d21 Hardbody
    09-19-2012 03:25 PM #2
    Found a car I want $5200 on stock wheels right now!

  3. Member mk4rida's Avatar
    Join Date
    Feb 22nd, 2010
    Location
    Millersville, PA 17551
    Posts
    10,025
    Vehicles
    2003 GLI
    10-28-2012 10:42 PM #3
    Free bump for a local You wouldn't be interested in an '03 24v 6spd GLI would you?
    VRalliance #16
    VRSociety #131


    Quote Originally Posted by DRH View Post
    Stick with PSU and you'll be a geriatric member in a few months.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts