GROUP BUY: Zeitronix and AEM Wideband Gauge solutions

[Pat@PMEngineering]

I'd like to help everyone out with wideband gauge solutions for you cars. The wideband gauge setups will allow you to log and monitor air/fuel ratios as well as do a few periphery things as well to help you maintain overall engine health and make peak power. These two solutions are the best bang for the buck on the market right now offering loads of features and usability without requiring thirteen other boxes for logging, tuning, and secondary features.

Zeitronix:
ZT-3 with ZR-1 Gauge Wideband Package
-complete wideband solution with gauge package
-can choose brushed aluminum or brushed black annodized alum bezel with either red or blue digits
-narrow band output, wideband output, analog wideband output (easily integrateable to any standalone or oem aplication with this features)
-most compact solution and simple 4 wire hookup
-Incredibly thin 60mm gauge which can be surface mounted, gauge pod mounted, or sat flush in a custom recessed pod like a vent with ulta thin cord for easy routing
-logging via included cable

Includes:
ZT3 controller
logging cable
gauge splitter
instructions
software
box
gauge in your choice of bezel and color
Bosch wideband sensor
weather tight molded sensor wiriing with protective sleeve and slim connector for easy run through walls

More info on website:
http://www.zeitronix.com/Products/Zt-3/Zt-3.shtml

Price: 250 + free shipping

















ZT-2 with ZR-2 Gauge WIdeband Package

-complete wideband solution with gauge package
-can choose brushed aluminum or brushed black annodized alum bezel with either red or blue digits
-narrow band output, wideband output, analog wideband output (easily integrateable to any standalone or oem aplication with this features), rpm input
-optional egt, boost, and temperature sensor inputs
-feature rich logging suite with the ability to log and display all inputs on screen such as boost, egt, etc all while still being able to see AFR readings
-Incredibly thin 60mm gauge which can be surface mounted, gauge pod mounted, or sat flush in a custom recessed pod like a vent with ulta thin cord for easy routing
-logging via included cable
-waning outputs

Includes:
ZT2 controller
logging cable
gauge splitter
instructions
software
box
gauge in your choice of bezel and color
Bosch wideband sensor
weather tight molded sensor wiriing with protective sleeve and slim connector for easy run through walls
egt connector for any k type thermocouple

optional sensors such as boost, egt, temp sensors and alum and steel bungs available at extra cost

More info on website:
http://www.zeitronix.com/Products/zt2/zt2.shtml

Price: 355 + free shipping


















Dash II XL with ZT-2 Controller
-Screen based viewing of not only wideband and other ZT-2 and ZT 3 features but also OBD2 data
-Two or more (up to 8) Zt-2s/Zt-3s can be connected to the DashDAQ II XL display. The DashDAQ can read and display wideband and sensor readings from each Zeitronix device plus OBDII data all at once.
-The DashDAQ has two additional 0-5 volt analog inputs and data logging is supported through an SD card slot on the side of the display.
-Easily mountable via the included suction cup window mount or via flat panel like mounting to the dash or home made bracket or recessed molded installation.
-easily portable transfer between vehicles and live info with lap-top less logging

Includes:
Dash DAQ II XL screen with USB B inputs, SD Card slot, mounting locations and integrated speaker
Serial logging cable
OBD 2 cable
Software CD and instructions
suction cup window mount, and fixed plate mount and hardware
box/warranty
ZT-2 controller, instructions, software, bosch sensor, egt connector, 2x wiring harness, data splitter

videos and further info on Dash DAQ II XL:
http://www.zeitronix.com/Products/dashdaq/dashdaq.shtml

Price: 700 + free shipping

















AEM Failsafe Wideband

-complete all in one gauge wideband solution
-no external boxes - full controller is integrate into the gage
-single wiring harness packaged nice and tight
-included bung for 02 sensor
-rpm based logging for map comparision
-integrateable easily via wideband and narrowband output into standard or aftermarket ecus
-all included silver and black gauge bezels as well as various colored screens and lamba/AFR selectable screens
-boost and AFR simultaneous viewability
-USB based logging

WIDEBAND FAILSAFE GAUGE FACEPLATE STYLES:
Kit comes with 6 different faceplates and black and silver bezels.
•Black and White AFR in sweeping LEDs
•Black and White Vacuum/Boost in sweeping LEDs
•Black Vacuum only in sweeping LEDs
•Black Lambda in sweeping LEDs


WIDEBAND FAILSAFE GAUGE TECHNICAL FEATURES:
•Displays both boost or vacuum and AFR or Lambda simultaneously on the same gauge
•No free air calibration required – ever
•Internal boost sensor
•Bosch Wideband UEGO sensor and weld-in bung included
•On-Board 3+ hour Datalogging capability at 20hz per parameter
•Full color Organic Light Emitting Diode (OLED) Display in center, user selectable feature (boost/vacuum or AFR)
•24 three-color sweeping LEDs, user selectable feature (boost/vacuum or AFR)
•Intuitive set up software
•Interchangeable faceplates and bezels (see options, above)
•Data analysis using AEMdata software


WIDEBAND FAILSAFE GAUGE INSTALLATION FEATURES:
•AEMnet compatible (CAN 2.0)
•Differential AFR analog output
•Differential boost analog output
•Configurable RPM input for logging
•One low-side driver output (Ground with 1.5 amp max draw)
•Positive-lock connectors
•Tunable PC-based software with USB connectivity
•Time based reset for outputs

Info on website:
http://www.aemelectronics.com/wideba...safe-gauge-84/

Price: 275 + free shipping

[Pat@PMEngineering]

The reason why these kits were chosen is because they offer the best bang for the buck with the most feautures without needing 4 million extra external logging boxes etc which drive up the cost. Plus there is only so much room to store all these boxes everywhere and not look like the inside of a network storage site.

Who should buy the Zeitronix ZT3?
-Someone who wants a compact solution with the ability to view real time AFR readings and/or integrating into a standalone solution. This also allows replacement of the oem oxygen sensor since it can run a simulated narrowband sensor. Sensors are easily aquirable from any auto parts store as well as it is a bosch sensor.

Who should buy the Zeitronix ZT2?
-Someone who loves the features of the ZT3 but wants a bit more. This solution allows you to log/view/input several other sensors as well as log against RPM to correlate to existing logs. This is important when you try and see your wideband data with the factory ecu and overlay the graphs. Otherwise you dont have a comparison point to go from. This also allows you to double as a boost gauge while still viewing AFR and the boost sensor is substantially more accurate then most boost gauges going up to 75psi or 100+. It can also allow you to log and view egt input (k type plug and play egt probes available), or temperature sensors for coolant or oil or any fluid really. Its a feature rich solution that allows you to log and view all of these variable in one nice gauge solution. No extra RPM or data boxes etc. And best of all made in the USA.

Downsides to the Zeitronix:
-you need a USB to serial converter as their logging cables are serial based]

Who should buy the AEM package?
-Someone who like the feature of having everything packaged into one gauge. No external boxes to hide. No extra controllers or RPM modules. Everything is literally included in this kit including a integrated MAP sensor, weld in bung, swappable face plates, swappable black and silver bezels, logging capability and sensor output. No free air calibration ever. This logs via a USB cable so no serial to USB adapters. Everything is well designed in one neat package. Less gauges, more work, great solution.

Downside to AEM kit:
-lacks expandability for other sensor inputs (but this may not be something everyone needs)
-not as classy of a bezel and display as the Zeitronix kit

[Pat@PMEngineering]

20 dollars off posted prices through 11/25 sunday for black friday special. Get in on the DEAL!!

[Pat@PMEngineering]

25 bucks off for Easter Discount!!!!! Through 4/7/13