*TIMING BELT done at 100k, along with waterpump and turbo and dv valve. Vehicle also has all new control arms, ball joints, and tie rods in the front, new shock tops and bushings also.
bump
#1
Car is sold.![]()
Last edited by mikeyglamour; 10-15-2012 at 11:11 PM.
|||Eurökult
#2
*TIMING BELT done at 100k, along with waterpump and turbo and dv valve. Vehicle also has all new control arms, ball joints, and tie rods in the front, new shock tops and bushings also.
bump
|||Eurökult
#9
I am exactly the same way, when I got this car it was loose, loud, clunky and sucked haha. All the modifications done to the car were only to repair something I was not satisfied with, The car now is incredible... a few odds and ends here I'm still buttoning up but compared to how I got it I'm quite happy with the result so far.
bump
|||Eurökult
#10
Also had the front resprayed and the car wetsanded. No rock chips, new grille, no plate holes.
![]()
|||Eurökult
#14
love the car man free bump let me know if ur interested in a bagged bmp gli![]()
#17
|||Eurökult
#18
#19
|||Eurökult
#21
Have a few questions. Have the intake valves been cleaned? Is there a front sway bar, if so is it hooked up? Cam follower changed?
#22
Cam follower changed, HPFP also changed, front sway is installed and working with the air suspension with no issues. I'm not sure on the intake valves, unless that was a step of the recall.
Turbo was also replaced at time of timing belt/waterpump etc service. And literally a week ago the N249 valve was replaced with the new revised model.
Bumpz
|||Eurökult
#26
Trade for 2002 Audi TT225??
Black w/ black leather
92k miles
6 speed manual
Unitronic stage 1+
New brakes with ceramic pads
Full emission delete
Amsoil, g12 ++
Well maintained
Plus 4k cash on my end
I'm local, let me know.
Last edited by VWstung; 10-04-2012 at 03:06 AM.
Specialized paint correction and protection for NJ, Fidelity Finish
#27
I actually had one of those too haha! Unfortunately due to the mileage it wouldn't really be cost affective, i'd be trading down to an older vehicle with less performance, that would be more difficult to get rid of, and I'd still have to do all of the maintenance (i.e. timing belt, waterpump, etc) And was the clutch replaced? I would consider the trade, but would need a signifigant amount of cash on top.
Bump
|||Eurökult
#28
Timing belt and water pump was done at 86k
Stock clutch![]()
Specialized paint correction and protection for NJ, Fidelity Finish
#30
#35