VWVortex


+ Reply to Thread
Results 1 to 26 of 26

Thread: FS: OEM LED MK6 Xenon Headlights w/ bulbs/ballasts/AFS

  1. Junior Member
    Join Date
    Nov 8th, 2011
    Location
    orange county, ca
    Posts
    85
    09-25-2012 11:30 PM #1
    For sale are brand new, never installed/driven headlights. 0 miles on em. All parts are 100% oem, parts included are

    LED Xenon Housing, pair
    Ballasts, pair
    Control Module, pair
    Bulbs, pair
    Bulb retainer rings, pair
    (side note, lens cap are included, i forgot to take pictures of em with it on)

    Prices on KefferVW is
    2X Headlights 942
    2X Control Module 534
    2X Ballast 306
    2X HID Bulb 240 (these you can actually get cheaper probably 180sih elsewhere)
    2X Bulb Retainer Rings 36

    If you have halogens, you'll need these.
    Otherwise its a direct swap if you already have xenons.


    There are two minor, cosmetic broken pieces. One is on the driver side headlight and the other is on the passenger which is a small piece of the lens.


    This is for sale for 1500 shipped via paypal lower 48 states. Thanks and let me know if you have any other questions.

    edit: month says 11, should be 9... its been a long day.










    That line is not a crack btw, its part of the lens.

    Last edited by snowboardgti; 10-07-2012 at 04:44 PM.

  2. Junior Member
    Join Date
    Nov 8th, 2011
    Location
    orange county, ca
    Posts
    85
    09-26-2012 10:55 PM #2
    100 off for locals with cash (SO CAL, LA, OC, Riverside)
    Last edited by snowboardgti; 10-14-2012 at 12:46 AM.

  3. Member kelpqq's Avatar
    Join Date
    Mar 26th, 2008
    Location
    Riverside, CA
    Posts
    866
    Vehicles
    10 GOLF TDI DSG
    09-27-2012 12:19 AM #3
    what do I need if I have the halogens?

  4. Junior Member
    Join Date
    Nov 8th, 2011
    Location
    orange county, ca
    Posts
    85
    09-27-2012 07:42 AM #4
    depends, if you want the simplest route w/out AFS, just install the lights with this adapter:
    http://www.ebay.com/itm/Xenon-Bi-Xen...6d3f41&vxp=mtr

    if you want AFS, you'll need to get a level sensor, control module and the adapter and wire them all up.. http://forums.vwvortex.com/showthrea...+led+headlight

    seems like 90% of the people just go w/ the adapter only, no AFS route and call it a day.

  5. Member TurboGliMK4's Avatar
    Join Date
    Aug 26th, 2009
    Location
    08873 NJ
    Posts
    1,406
    Vehicles
    MK6 CSG GTI : ) R.I.P 2004.5 BMP GLI
    09-27-2012 02:54 PM #5
    mmmhhhmmm so sexc must fight temptation.

  6. Junior Member
    Join Date
    Nov 8th, 2011
    Location
    orange county, ca
    Posts
    85
    09-27-2012 11:46 PM #6
    Quote Originally Posted by TurboGliMK4 View Post
    mmmhhhmmm so sexc must fight temptation.
    oem quality, leds are white, white and bright
    bump, keep in mind, these have zero miles on em

  7. Junior Member
    Join Date
    Nov 8th, 2011
    Location
    orange county, ca
    Posts
    85
    09-28-2012 07:20 PM #7
    bump

  8. Junior Member
    Join Date
    Nov 8th, 2011
    Location
    orange county, ca
    Posts
    85
    10-01-2012 01:58 AM #8
    bump!

  9. Junior Member
    Join Date
    Nov 8th, 2011
    Location
    orange county, ca
    Posts
    85
    10-02-2012 02:46 PM #9
    bump!

  10. Member Canthoney's Avatar
    Join Date
    Aug 4th, 2012
    Location
    Kansas City, KS
    Posts
    162
    Vehicles
    2005 Impala, 2006 Mustang V-6, 2011 Mustang GT, 2012 VW GTI
    10-02-2012 08:58 PM #10
    I will buy these from you if you can answer a question. I was told that I would need a software version higher than 064 to run LED DRL on my Highline CECM, is that true?


    "Rumors of my death have been greatly exaggerated"
    - Mark Twain

  11. Junior Member
    Join Date
    Nov 8th, 2011
    Location
    orange county, ca
    Posts
    85
    10-03-2012 12:58 PM #11
    Quote Originally Posted by Canthoney View Post
    I will buy these from you if you can answer a question. I was told that I would need a software version higher than 064 to run LED DRL on my Highline CECM, is that true?


    "Rumors of my death have been greatly exaggerated"
    - Mark Twain
    already pmed, for others wondering... my 2010 halogens cecm (087) never needed a software upgrade. a 2012 model (which actually use a 086 cecm instead of 087) which come exactly the same on both halogen and bixenon models should be good to go.

  12. Junior Member
    Join Date
    Nov 8th, 2011
    Location
    orange county, ca
    Posts
    85
    10-05-2012 02:00 PM #12
    bump!
    DIY OEM Xenon AFS
    PM me for socal xenon AFS retrofit

  13. Junior Member
    Join Date
    Sep 29th, 2012
    Location
    DFW
    Posts
    68
    Vehicles
    '12 VW Golf TDI DSG, '92 Honda Civic VX
    10-05-2012 04:47 PM #13
    Quote Originally Posted by snowboardgti View Post
    already pmed, for others wondering... my 2010 halogens cecm (087) never needed a software upgrade. a 2012 model (which actually use a 086 cecm instead of 087) which come exactly the same on both halogen and bixenon models should be good to go.
    Are you sure about that? I was under the impression you needed the 087 CECM in order to use the high-beams with the Bi-Xenons. Correct me if I'm wrong because I'm quite curious myself.

  14. Junior Member
    Join Date
    Nov 8th, 2011
    Location
    orange county, ca
    Posts
    85
    10-05-2012 05:34 PM #14
    Quote Originally Posted by DUBPL8 View Post
    Are you sure about that? I was under the impression you needed the 087 CECM in order to use the high-beams with the Bi-Xenons. Correct me if I'm wrong because I'm quite curious myself.
    087 is highline which comes w/ GTIs in the 2010 and 2011 models and yes, they are needed for the high beam shutters.

    2012 models that came w/ oem bixenons w/ leds actually come wiith 086 cecms.
    DIY OEM Xenon AFS
    PM me for socal xenon AFS retrofit

  15. Junior Member
    Join Date
    Sep 29th, 2012
    Location
    DFW
    Posts
    68
    Vehicles
    '12 VW Golf TDI DSG, '92 Honda Civic VX
    10-05-2012 05:49 PM #15
    Quote Originally Posted by snowboardgti View Post
    087 is highline which comes w/ GTIs in the 2010 and 2011 models and yes, they are needed for the high beam shutters.

    2012 models that came w/ oem bixenons w/ leds actually come wiith 086 cecms.
    Wow that's news to me! Good news that is haha

  16. Member Canthoney's Avatar
    Join Date
    Aug 4th, 2012
    Location
    Kansas City, KS
    Posts
    162
    Vehicles
    2005 Impala, 2006 Mustang V-6, 2011 Mustang GT, 2012 VW GTI
    10-06-2012 01:13 AM #16
    So does that mean that if I have a 086 CECM that my high beams won't work? I'm am so confused on what need for it them to work perfectly lol.


    "Rumors of my death have been greatly exaggerated"
    - Mark Twain

  17. Junior Member
    Join Date
    Nov 8th, 2011
    Location
    orange county, ca
    Posts
    85
    10-06-2012 05:08 AM #17
    Quote Originally Posted by Canthoney View Post
    So does that mean that if I have a 086 CECM that my high beams won't work? I'm am so confused on what need for it them to work perfectly lol.


    "Rumors of my death have been greatly exaggerated"
    - Mark Twain
    Your 086 WILL work because 2012 gtis that come with xenons/leds have 086
    DIY OEM Xenon AFS
    PM me for socal xenon AFS retrofit

  18. Junior Member
    Join Date
    Nov 8th, 2011
    Location
    orange county, ca
    Posts
    85
    10-07-2012 04:42 PM #18
    price drop bump!
    DIY OEM Xenon AFS
    PM me for socal xenon AFS retrofit

  19. Junior Member
    Join Date
    Nov 8th, 2011
    Location
    orange county, ca
    Posts
    85
    10-08-2012 04:41 PM #19
    bump!
    DIY OEM Xenon AFS
    PM me for socal xenon AFS retrofit

  20. Junior Member
    Join Date
    Nov 8th, 2011
    Location
    orange county, ca
    Posts
    85
    10-09-2012 04:00 PM #20
    bump!
    DIY OEM Xenon AFS
    PM me for socal xenon AFS retrofit

  21. Junior Member
    Join Date
    Nov 8th, 2011
    Location
    orange county, ca
    Posts
    85
    10-11-2012 08:51 AM #21
    Bump!
    DIY OEM Xenon AFS
    PM me for socal xenon AFS retrofit

  22. Junior Member
    Join Date
    Nov 8th, 2011
    Location
    orange county, ca
    Posts
    85
    10-12-2012 01:47 AM #22
    bump!
    DIY OEM Xenon AFS
    PM me for socal xenon AFS retrofit

  23. Junior Member
    Join Date
    Nov 8th, 2011
    Location
    orange county, ca
    Posts
    85
    10-12-2012 07:49 PM #23
    1400 shipped
    DIY OEM Xenon AFS
    PM me for socal xenon AFS retrofit

  24. Junior Member
    Join Date
    Nov 8th, 2011
    Location
    orange county, ca
    Posts
    85
    10-14-2012 12:45 AM #24
    some asked for pics about the pieces,



    the broken parts dont crack into the housing itself and have no affect on the oem seal. these are merely cosmetic and will not be visible when mounted and when hood is opened
    DIY OEM Xenon AFS
    PM me for socal xenon AFS retrofit

  25. Junior Member
    Join Date
    Nov 8th, 2011
    Location
    orange county, ca
    Posts
    85
    10-17-2012 05:59 PM #25
    SOLD!
    DIY OEM Xenon AFS
    PM me for socal xenon AFS retrofit

  26. Member Canthoney's Avatar
    Join Date
    Aug 4th, 2012
    Location
    Kansas City, KS
    Posts
    162
    Vehicles
    2005 Impala, 2006 Mustang V-6, 2011 Mustang GT, 2012 VW GTI
    10-17-2012 08:31 PM #26
    Quote Originally Posted by snowboardgti View Post
    SOLD!

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts