Username or Email Address
Do you already have an account?
Forgot your password?
  • Log in or Sign up

    VWVortex


    Page 1 of 2 12 LastLast
    Results 1 to 35 of 56

    Thread: Verdict Motorsports - Billet Injector Cups

    1. Former Advertiser
      Join Date
      May 13th, 2009
      Location
      Mass
      Posts
      1,524
      Vehicles
      Germans & Scandinavians
      09-30-2012 09:00 PM #1


      After dealing with cracked or leaky injector cups, we decided it was time we do something about it.

      Machined from 6061 aluminum and available in billet or anodized finishes for durability and corrosion resistance. Our Billet 1.8T Fuel Injector Cups are a direct replacement for stock.











      Installation:
      Should be done with the intake manifold out of the car. This is to prevent sealant and whatever other grime is on or around your stock injector cups from dropping into and contaminating the engine. Upon removal of the stock injector cups the intake manifold threads will need to be cleaned prior to installation.

      An optional installation kit is available and comes with the following:

      - Machined hex tool to remove your stock plastic cups and install the billet replacements.
      - Stainless steel wire brush to remove OEM thread sealant from the intake manifold threads.
      - Loctite thread sealant to replace the original sealant and ensure a leak free fitment.

      We strongly suggest adding an installation kit if you don't have the necessary items to remove, clean and reseal the injector cups properly.

      Compatibility:
      We offer cups for the following 1.8T engine codes: AEB, AGU, ATC, ATW, AWM, AMB, AWD, AWW, AWP, AMU, BAM and BEA. For compatibility of other engine codes, feel free to drop us a line.

      Free Shipping:
      Has been extended throughout the continental United States until 7/31/13. Enter the words "Free Shipping" in the coupon code box and receive FREE Priority Shipping! We're happy to ship internationally, however postage will apply to those orders.

      All orders can be placed through our website and will ship within 24 hours.


      To place your order or for further info Select Here


      For any questions, comments or inquiries, feel free to post up or drop us a line.

      Phil
      Last edited by Phil@VerdictMotorsports; 06-21-2013 at 11:52 PM.

    2. Former Advertiser
      Join Date
      May 13th, 2009
      Location
      Mass
      Posts
      1,524
      Vehicles
      Germans & Scandinavians
      10-03-2012 04:19 PM #2
      A couple pics of the early and late style cups:








    3. Former Advertiser
      Join Date
      May 13th, 2009
      Location
      Mass
      Posts
      1,524
      Vehicles
      Germans & Scandinavians
      10-12-2012 11:08 AM #3
      Free priority shipping extended through 11/30/12

    4. 10-15-2012 12:22 PM #4
      Quote Originally Posted by Phil@VerdictMotorsports View Post
      Free priority shipping extended through 11/30/12

    5. Former Advertiser
      Join Date
      May 13th, 2009
      Location
      Mass
      Posts
      1,524
      Vehicles
      Germans & Scandinavians
      11-02-2012 01:39 PM #5
      Thanks for the orders everyone

    6. Former Advertiser
      Join Date
      May 13th, 2009
      Location
      Mass
      Posts
      1,524
      Vehicles
      Germans & Scandinavians
      11-07-2012 04:24 PM #6

    7. Former Advertiser
      Join Date
      Sep 14th, 2012
      Location
      Mass
      Posts
      112
      11-08-2012 11:19 PM #7
      Stop the leaks!

    8. Former Advertiser
      Join Date
      May 13th, 2009
      Location
      Mass
      Posts
      1,524
      Vehicles
      Germans & Scandinavians
      11-29-2012 07:44 PM #8
      Thanks for the orders everyone

    9. Former Advertiser
      Join Date
      May 13th, 2009
      Location
      Mass
      Posts
      1,524
      Vehicles
      Germans & Scandinavians
      12-03-2012 07:32 PM #9
      Currently back ordered on our late style cups.

      Running more this week and should be shipping those orders by next Monday (12/10).

    10. Former Advertiser
      Join Date
      May 13th, 2009
      Location
      Mass
      Posts
      1,524
      Vehicles
      Germans & Scandinavians
      12-17-2012 05:50 PM #10
      Late style injector cups are back in stock as of last week, and all pending orders waiting for these have shipped.

      We also decided to redesign the hex tool which is now available separately for everyone who wanted one.



      http://www.verdictmotorsports.com/Pr...uctCode=VMS140

    11. Former Advertiser
      Join Date
      May 13th, 2009
      Location
      Mass
      Posts
      1,524
      Vehicles
      Germans & Scandinavians
      12-20-2012 05:50 PM #11
      Replied to PMs

    12. Former Advertiser
      Join Date
      May 13th, 2009
      Location
      Mass
      Posts
      1,524
      Vehicles
      Germans & Scandinavians
      12-31-2012 04:46 PM #12
      Have a safe and happy New Years everyone!


    13. Former Advertiser
      Join Date
      May 13th, 2009
      Location
      Mass
      Posts
      1,524
      Vehicles
      Germans & Scandinavians
      01-03-2013 12:12 PM #13
      Free priority shipping extended until 2/1/13

    14. Former Advertiser
      Join Date
      May 13th, 2009
      Location
      Mass
      Posts
      1,524
      Vehicles
      Germans & Scandinavians
      01-10-2013 01:39 PM #14
      Thanks guys

    15. Former Advertiser
      Join Date
      May 13th, 2009
      Location
      Mass
      Posts
      1,524
      Vehicles
      Germans & Scandinavians
      01-16-2013 02:44 PM #15
      Free priority shipping!!

    16. Member Triton613's Avatar
      Join Date
      May 7th, 2006
      Location
      Denver, CO
      Posts
      217
      Vehicles
      2004 Audi USP Avant 6spd, 2002 GTI 1.8T-Dead, 1993 Corrado SLC, 1983 Rabbit GTI
      01-17-2013 01:54 AM #16
      Powder coating available?

    17. Former Advertiser
      Join Date
      May 13th, 2009
      Location
      Mass
      Posts
      1,524
      Vehicles
      Germans & Scandinavians
      01-17-2013 05:54 PM #17
      Quote Originally Posted by Triton613 View Post
      Powder coating available?
      Powder coating? No.

      Anodizing? Yes.

      Powder coating a threaded component would add too much material and thus the threads would be compromised. It would also make fitting the injectors harder as the ID would be smaller. Anodizing is corrosion resistant and adds strength to the part (threads included). It also doesn't flake like traditional coatings.


    18. Former Advertiser
      Join Date
      May 13th, 2009
      Location
      Mass
      Posts
      1,524
      Vehicles
      Germans & Scandinavians
      01-29-2013 02:20 PM #18

    19. Former Advertiser
      Join Date
      May 13th, 2009
      Location
      Mass
      Posts
      1,524
      Vehicles
      Germans & Scandinavians
      02-07-2013 02:16 PM #19

    20. Former Advertiser
      Join Date
      May 13th, 2009
      Location
      Mass
      Posts
      1,524
      Vehicles
      Germans & Scandinavians
      02-14-2013 11:48 AM #20

    21. Former Advertiser
      Join Date
      May 13th, 2009
      Location
      Mass
      Posts
      1,524
      Vehicles
      Germans & Scandinavians
      02-24-2013 05:51 PM #21
      Free shipping extended until 4/1/13.


    22. Former Advertiser
      Join Date
      May 13th, 2009
      Location
      Mass
      Posts
      1,524
      Vehicles
      Germans & Scandinavians
      03-03-2013 07:15 PM #22
      Updated compatibility for additional engine codes.


    23. Former Advertiser
      Join Date
      May 13th, 2009
      Location
      Mass
      Posts
      1,524
      Vehicles
      Germans & Scandinavians
      03-12-2013 02:38 PM #23
      Order now and put an end to leaky injector cups once and for all!

    24. 03-20-2013 04:09 PM #24
      Got mine on Monday (anodized black)

      Scheduled to be put in next week. Thanks!

    25. Former Advertiser
      Join Date
      May 13th, 2009
      Location
      Mass
      Posts
      1,524
      Vehicles
      Germans & Scandinavians
      03-21-2013 01:09 PM #25
      Quote Originally Posted by cyberpmg View Post
      Got mine on Monday (anodized black)

      Scheduled to be put in next week. Thanks!
      No problem, thank you

    26. 04-03-2013 11:58 AM #26

    27. Former Advertiser
      Join Date
      May 13th, 2009
      Location
      Mass
      Posts
      1,524
      Vehicles
      Germans & Scandinavians
      04-05-2013 02:43 PM #27
      Friday afternoon bump!

    28. Former Advertiser
      Join Date
      May 13th, 2009
      Location
      Mass
      Posts
      1,524
      Vehicles
      Germans & Scandinavians
      04-10-2013 11:57 AM #28
      Free shipping has been extended throughout the continental United States until 5/31/13.

      Enter the words "Free Shipping" in the coupon code box and receive FREE Priority Shipping!


    29. 04-23-2013 12:16 AM #29
      Just placed my order

    30. Former Advertiser
      Join Date
      May 13th, 2009
      Location
      Mass
      Posts
      1,524
      Vehicles
      Germans & Scandinavians
      04-23-2013 02:26 PM #30
      Quote Originally Posted by 2005VWGTI1.8T View Post
      Just placed my order
      Enjoy! Be sure to post up your installed pics

    31. Former Advertiser
      Join Date
      May 13th, 2009
      Location
      Mass
      Posts
      1,524
      Vehicles
      Germans & Scandinavians
      05-08-2013 12:13 PM #31

    32. Former Advertiser
      Join Date
      May 13th, 2009
      Location
      Mass
      Posts
      1,524
      Vehicles
      Germans & Scandinavians
      05-14-2013 04:22 PM #32
      Red injector cups are now available on our website!




      http://www.verdictmotorsports.com/Pr...uctCode=VMS107


    33. Former Advertiser
      Join Date
      May 13th, 2009
      Location
      Mass
      Posts
      1,524
      Vehicles
      Germans & Scandinavians
      05-23-2013 10:46 AM #33

    34. Former Advertiser
      Join Date
      May 13th, 2009
      Location
      Mass
      Posts
      1,524
      Vehicles
      Germans & Scandinavians
      05-25-2013 10:42 AM #34
      More injector cups on their way to anodizing!


    35. Former Advertiser
      Join Date
      May 13th, 2009
      Location
      Mass
      Posts
      1,524
      Vehicles
      Germans & Scandinavians
      05-31-2013 11:23 AM #35

    Page 1 of 2 12 LastLast

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •