Mr. Henryckson haz one
#1
Who has 1 or who can roll some fenders for me?
2012 Golf R | GIAC | EVOMS | Autotech | H&R | BBS|
ʎppǝɹℲ ɯɐǝ┴ Need Vinyl Cut? PM Me
www.wheelsnob.com
Get ur wheel on!
Get ur gear on!
#3
2012 Golf R | GIAC | EVOMS | Autotech | H&R | BBS|
ʎppǝɹℲ ɯɐǝ┴ Need Vinyl Cut? PM Me
www.wheelsnob.com
Get ur wheel on!
Get ur gear on!
#4
Found a guy who says he does Fender Pulling for VW's here and there. Said to bring the wheels and he will pull to the wheels needs.
Maybe we will keep the BBS.![]()
2012 Golf R | GIAC | EVOMS | Autotech | H&R | BBS|
ʎppǝɹℲ ɯɐǝ┴ Need Vinyl Cut? PM Me
www.wheelsnob.com
Get ur wheel on!
Get ur gear on!
#6
I am trying to fit the BBS. The OEM Wheels fit fine. The BBS are rubbing hard on hard turns. The funny thing is the Golf sits higher than the Jetta did and the Jetta never rubbed from the front.
I spoke with WSI today and they can shave 5mm off the back of each wheels for $50 per. I may look into that to get back 5 mil.. but Honestly dont feel like going through all that to make them work.
If they don't work after rolled fenders then I will off them for cheap.![]()
2012 Golf R | GIAC | EVOMS | Autotech | H&R | BBS|
ʎppǝɹℲ ɯɐǝ┴ Need Vinyl Cut? PM Me
www.wheelsnob.com
Get ur wheel on!
Get ur gear on!
#7
How's the alignment set up? Too bad they're not gold centers.![]()
#8
2012 Golf R | GIAC | EVOMS | Autotech | H&R | BBS|
ʎppǝɹℲ ɯɐǝ┴ Need Vinyl Cut? PM Me
www.wheelsnob.com
Get ur wheel on!
Get ur gear on!
#9
If you plan on lowering it I think you're gonna need to get an alignment. Too bad the tires are too small.![]()
#10
What I meant to say is I didnt feel like adjusting Camber to make them fit.
Had Greg @ Sakura Garage on 5th and Smith do it. The guy can do almost anything with fenders.
Car needs alignment but prob wont see it till after big bear due to time constraints.. Besides that and software car is ready for Big Bear.
![]()
2012 Golf R | GIAC | EVOMS | Autotech | H&R | BBS|
ʎppǝɹℲ ɯɐǝ┴ Need Vinyl Cut? PM Me
www.wheelsnob.com
Get ur wheel on!
Get ur gear on!
#12